Repair Manual

iPhone 12
073-00291-A | 46© 2022 Apple Inc. All rights reserved.
13. Press the ends of the
receiver flex cable (1),
Multi-Touch flex cable (2),
and display flex cable (3)
to the connectors. Press
evenly along the length of
each connector.
15. Use ESD-safe tweezers to
position the lower cowling
over the ends of the
Multi-Touch, display, and
battery flex cables.
16. Use the black torque driver
and Micro stix bit to install
two new trilobe screws into
the lower cowling.
12. Align the left edge of the
display with the left edge
of the enclosure as shown.
Gently press along the edges
of the display to secure it to
the suction cups.
Display | Reassembly
14. Press the end of the
battery flex cable to
the connector (4). Press
evenly along the length of
the connector.
Note: The display flex cable
covers the Multi-Touch
flex cable.