Repair Manual

iPhone 12
073-00291-A | 91© 2022 Apple Inc. All rights reserved.
7. Use the gray torque driver
and super screw bit to install
one new super screw into
the lower right corner of the
SIM reader.
8. Press the end of the SIM reader flex cable to the connector.
9. Position the SIM reader
connector cowling (1) over
the end of the flex cable.
Inspect the grounding
spring on the Taptic Engine
connector cowling to
ensure that it’s not
damaged.
Caution
Taptic Engine | Reassembly
10. Position the Taptic Engine
connector cowling (2) over
the end of the flex cable.