Repair Guide

iPhone 13
073-00323-A | 47© 2022 Apple Inc. All rights reserved.
17. Use ESD-safe tweezers to
slide the tab of the upper
cowling into the slot behind
the ambient light sensor
flex cable. Then tilt the
cowling down over the end
of the flex cable.
Ensure that you don’t tear
the ambient light sensor
flex cable as you reinstall
the cowling.
Caution
18. Use the black torque driver
and JCIS bit to install five
new crosshead screws
into the upper and lower
cowlings (1).
19. Use the green torque driver
and Micro stix bit to install
one new trilobe screw into
the upper cowling (2).
Display | Reassembly