Repair Guide

iPhone 13
073-00323-A | 58© 2022 Apple Inc. All rights reserved.
2. Use a torque driver and the
JCIS bit to remove the three
crosshead screws from the
camera cowling. Set aside
the screws.
Removal
1. Place the enclosure in the repair tray with the Lightning connector facing the cutout.
3. Use ESD-safe tweezers to
tilt up the right edge of the
camera cowling (1). Then
pull the cowling to the right
to release the tabs on the
left (2). Save the cowling for
reassembly.
Camera | Removal