9A10495701 Z CD-X10i Micro Hi-Fi System OWNER’S MANUAL Includes adapters for: iPod nano iPod with video iPod mini iPod with Click Wheel iPod with color display Adapters sold separately: iPod with dock connector
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT SAFETY INSTRUCTIONS CAUTION • Read all of these Instructions.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION < Do not expose this apparatus to drips or splashes. < Do not place any objects filled with liquids, such as vases, on the apparatus. < Do not install this apparatus in a confined space such as a book case or similar unit. < The apparatus draws nominal non-operating power from the AC outlet with its POWER switch in the off position.
Contents Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Before Using the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Before Using the Unit Read this before operation < As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. The ventilation holes should not be covered.
Discs Discs which can be played on this unit: • Conventional audio CDs bearing the COMPACT DISC DIGITAL AUDIO logo on the label: • Properly finalized CD-R and CD-RW discs Note: < Depending on the quality of the disc and/or the condition of the recording, some CD-R/CD-RW discs may not be playable. < Copy-protected discs and other discs that do not conform to the CD standard may not play back correctly in this player.
Connections CAUTION < Turn off the power of all the equipment before making connections. < Read instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection cords with the power cord. FM antenna AM antenna Speaker (R) Speaker (L) Subwoofer C B E A G CAUTION: Make sure to fasten the Dock’s cable with this clip.
A iPod Dock E SPEAKERS Connect the Dock to the “TO DOCK” port, and fasten the cable with the clip. < Securely insert the plug in the direction as figured. B AM loop antenna Position the antenna for the best sound. If you want, you can hook the AM antenna on a wall as shown below: Connect the left speaker’s plug to L, and the right speaker’s plug to R. < If not using the included speakers, make sure the speakers you use are at least 4 Ω impedance.
Unit Functions L A B C R S T U V M N O I J K J H P Q I H A 8 B C D E F G E D W
A STANDBY/ON Use this button to turn the unit on or standby. The main unit is powered via the subwoofer. You need to first turn on the subwoofer. M FM MODE In FM TUNER mode, use this button to select stereo or monaural. N PRESET/SCROLL When the main unit is in the standby mode, the power indicator of the Subwoofer is orange. When the unit is turned on, the indicator turns blue. The equipment draws a nominal amount of power from the AC outlet even with its STANDBY/ON switch in the STANDBY position.
Wall Mounting Remote Control Unit You can mount the main unit and/or the left and right speakers on a wall. The provided Remote Control Unit allows the unit to be operated from a distance. When operating the remote control unit, point it towards the remote sensor on the front panel of the unit. Precautions < Pay attention to the length of cables. iPod Dock: 39” (1m) Speaker and Subwoofer cables: 118” (3m) Do not attempt to mount the main unit and the speakers too far from the subwoofer and the Dock.
Getting started The CD-X10i comes mounted with an adapter for iPod with color display (40GB, 60GB), “60GB (color) + Photo 40GB/60GB”. To play your iPod through the CD-X10i, you have first to check if the factory mounted adapter fits your model of iPod. If it does not, you have to replace it with a correct one, as explained below. 3. Insert the adapter into the Dock of the CD-X10i.
Basic Operation (Rear panel of the subwoofer) 3 Select a source by pressing the FUNCTION button. 1 2 3 4 1 Turn on the subwoofer. 2 Press the STANDBY/ON switch on the main unit. < To listen to an external source connected to the AUX IN jack, select AUX. < In iPod and AUX modes, the display always shows the clock and the volume level. The ring surrounding the STANDBY/ON button lights when the unit is on.
Headphones For private listening, first reduce the volume level to minimum. Then insert the plug from your headphones into the PHONES jack, and adjust the volume using the VOLUME buttons. The sound from the speakers is cut off while the headphone jack is inserted. Sleep Timer You can set a sleep timer so the unit turns itself off after a specified time. Press the SLEEP button repeatedly until desired time appears on the display.
Listening to iPod Insert the iPod into the Dock of the CD-X10i. Then press the Play/Pause button (y/J) on the iPod. The CD-X10i will automatically turn on and start playback from the iPod’s music list. < If the iPod that is in playback mode is inserted into the Dock, the CD-X10i will automatically turn on and start playback of the iPod. < Make sure to use an appropriate Dock adapter (see “Getting started” on page 11).
To go back to the previous menu Press the MENU button to go back to the previous menu. This button is equivalent to the MENU button on your iPod. To activate the shuffle mode During playback, press the SHUFFLE button to change the shuffle mode. Each time the SHUFFLE button is pressed, the SHUFFLE setting of iPod is changed as follows: songs albums off If iPod is set to shuffle songs or albums, the Shuffle icon ( appears in the iPod’s display.
Listening to CD 3 5 1 2 4 1 Press the FUNCTION button to select “CD”. 4 Press the OPEN/CLOSE button to close the CD door. 2 Press the OPEN/CLOSE button. < It takes a few seconds for the unit to load the disc. < When no disc is loaded in the CD player, “no cd” is displayed. total tracks total playing time 3 Put a disc onto the center spindle of the player with the label side facing you. Press the disc onto the spindle until a slight “click” is heard indicating the disc is mounted correctly.
Repeat Playback (CD) Every time the REPEAT button is pressed, the mode is changed as follows: REPEAT REPEAT ALL (off) To suspend playback temporarily (pause mode) Press the Play/Pause button (G/J) during playback. Playback stops at the current position. To resume playback, press the Play/Pause button (G/J) again.
Shuffle Playback (CD) Programmed Playback (CD only) The tracks can be played randomly. Press the SHUFFLE button during playback or when in the stop mode. The SHUFFLE indicator appears on the display. FUNCTION < If you press the / button during shuffle playback, next track will be randomly selected and played. If you press the . button, the currently played track will be played from the beginning. A track cannot be replayed during shuffle playback.
3 Press the Skip button (.or/) repeatedly to select a To check the programmed order track, then press the MEMORY button. track number program number In the stop mode, press the MEMORY button repeatedly. The track number and program number will be shown on the display. To add a track to the end of the program In the stop mode, press the MEMORY button repeatedly until “- -” appears on the display. Select a track number using the Skip button (. or/ ) and then press the MEMORY button.
Listening to an External Source 1 2 3 1 Connect the PHONES jack (audio output jack) of a 3 Play the source, and adjust the volume using the portable audio player to the AUX IN jack of the CD-X10i using the supplied stereo mini plug cable. VOLUME buttons of the CD-X10i and of the audio player. When using the PHONES jack of your mini player, you must adjust the volume of the mini-player or you may hear no sound from your CD-X10i.
Listening to the Radio FM MODE button Pressing this button alternates between STEREO mode and MONO mode. 1 2 3 1 Press the FUNCTION button to select “TUNER”. < You can also use the FM/AM button to select “TUNER”. STEREO FM stereo broadcasts are received in stereo and the “STEREO” indicator lights in the display. < If the sound is distorted and the “STEREO” indicator flashes, the signal is not strong enough for good stereo reception. In this case, change to MONO mode.
Preset Tuning You can program 10 FM & 10 AM channel presets. How to select preset stations If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. 1 To select FM or AM, press the FM/AM button. 1 Tune in a station you want to listen to (see steps 1 to 3 of page 21). 2 Press the MEMORY button. 3 Within 5 seconds, select a preset channel to store the station using the PRESET buttons.
Setting the Clock 4 Press the SKIP button (.//) to set the current hour. STANDBY/ON TIME SET If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. 5 Press the TIME SET button. The “minute” value blinks. 1 If the unit is on, press the STANDBY/ON switch to turn it standby 2 Press and hold the TIME SET button for more than 3 seconds and release it when “12H” or “24H” appears on the display. “12” or “24” blinks.
Setting the Timer 4 Press the SKIP button (.//) to set the stop time (hour), and then press the TIMER button. TIMER / < The unit can be programmed to turn on and off at a specified time. < Adjust the clock before setting the timer. 1 Press and hold the TIMER button for more than 2 seconds and release it when the “hour” value starts blinking. The “minutes” value starts flashing. 5 Press the SKIP button (.//) to set the stop time (minute), and then press the TIMER button.
7 Press the SKIP button (.//) to set the volume, and To turn on or off the timer then press the TIMER button. When you don’t use the timer, press the TIMER button to turn it off. (The TIMER indicator disappears from the display.) Press the TIMER button again to turn it on. < When the timer is turned on, the timer settings are displayed one by one, and the TIMER indicator lights on the display. Setting the timer is now completed and the timer is turned on.
Troubleshooting If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. General No power e Check the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on. Make sure there is power to the AC outlet by plugging another item such as a lamp or fan into the outlet. No sound from speakers.
Specifications AMPLIFIER section Output Power (L+R) . . . . . . . . . . . . . . . . . . . . . . . 5 W + 5 W Output Power (Subwoofer) . . . . . . . . . . . . . . . . . . . . . . 15 W Input Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mV Frequency Response . . . . . . . . . . . . . . . . . . . 50 to 20,000 Hz TUNER Section (FM) Frequency Range . . . . . . . . . . . . . . . . . 87.50 to 108.00 MHz Sensitivity (S/N30dB). . . . . . . . . . . . . . . . . . . . . . .
Z TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California 90640 Phone: (323) 726-0303 TEAC CANADA LTD. 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada Phone: (905) 890-8008 TEAC MEXICO, S.A. De C.
