User`s manual

780 W maximum at 220V
880 W maximum at 240V
__________________________________________________________________
Parts list (including options)
__________________________________________________________________
LaserWriter IInt
LaserWriter IIntx
LaserWriter II toner cartridge
LaserWriter II letter cassette
LaserWriter II legal cassette
LaserWriter II A4 cassette
LaserWriter II B5 cassette
LaserWriter II envelope cassette
1 Megabyte LaserWriter IIntx RAM Upgrade Kit
4 Megabyte LaserWriter IIntx RAM Upgrade Kit
LocalTalk Locking Connector Kit
LocalTalk Locking Cable Kit
LocalTalk Custom Wiring Kit
SCSI peripheral cable
SCSI cable terminator
__________________________________________________________________
Appendix F: Status Lights, Ports, Expansion Slot, and Switches
__________________________________________________________________
Status lights
The four LED status lights on the front panel of the LaserWriter II supply the following
information:
-green Ready/In Use light-Flashes during warmup and operation. Steady when warmed up and
ready to print.
-orange Low Toner Level light-Steady when toner powder needs to be redistributed or when
toner cartridge needs replacement. Flashes when cartridge is incorrectly installed.
-red Paper Out light-Flashes when printer is ready to accept manually fed paper. Steady when
the printer is out of paper or paper cassette is not in place.
-red Paper Jam light-Steady until jam is cleared.
-red Paper Jam light -Flashes when printer needs service.
Ports
The LaserWriter IInt and LaserWriter IIntx connector panels have three ports in common.
The Apple Desktop Bus port may be used for future expansion.
The 25-pin serial port is for non-LocalTalk serial connections.