User guide

Chapter 14 Recording in Logic Express 377
Setting Up Track Channels
If you want to make adjustments to audio channel strips, you can do it directly in the
Arrange channel strip. You can also use the Mixer window to adjust channel strip
settings. Full details in “Setting Channel Strip Levels” on page 576.
Making Mono or Stereo Recordings
Logic Express allows you to make mono or stereo recordings.
To switch the recording format of a channel:
m Click-hold the Format button of the channel strip, and choose the desired format from
the pop-up menu.
The symbol on the button indicates the current status as follows:
 Mono: One circle represents a mono input format. The level meter shows a single
column.
 Stereo: Two, interlocked circles represents a stereo input format. The level meter
divides into two independent columns when a stereo input format is chosen.
 Left: Two circles, left one filled, indicates a left channel input format. When this input
format is chosen, only the left channel of a stereo audio file is played back. The level
meter shows a single column.
 Right: Two circles, right one filled, indicates a right channel input format. When this
input format is chosen, only the right channel of a stereo audio file is played back.
The level meter shows a single column.
LeftStereo RightMono