User guide

Chapter 17 Editing MIDI in the Hyper Editor 457
Naming a Hyper Set
By default, a new hyper set is named MIDI Controls or GM Drum Kit.
To re-name a hyper set:
m Double-click the name shown in the Hyper Set menu of the Inspector, type in the
desired name and press Return.
Clearing and Deleting a Hyper Set
Clearing a hyper set resets a hyper set to its default, containing the preset event
definition for the volume controller.
To clear the current hyper set:
m Choose Hyper > Clear Hyper Set (or use the Hyper Set menu, or corresponding key
command).
To delete the current hyper set:
m Choose Hyper > Delete Hyper Set.
Loading a Hyper Set
You can switch the Hyper Editor display to the desired event types by loading a saved
Hyper Set.
To load a hyper set:
m Click the Hyper Set menu in the Inspector, and choose the desired hyper set from the
pop-up menu.