User guide

Chapter 33 Working With Notation 817
Automatic page and bar number display, and automatic display of instrument names
can be switched on and off for the whole project—by activating or deactivating the
corresponding checkboxes in this tab.
For each of these options, you can set the font, size, and face by clicking the Choose
button.
The corresponding text styles in the Text Styles window (see “Working With Text Styles”
on page 746) are automatically updated if you edit these settings.
Page Number Parameters
The Page Numbers checkbox must be activated for the following parameters to have
an effect.
Horizontal Position
Alters the horizontal alignment on the page. Choose from:
 Alternating: Alternating, beginning on the right side.
 Left, Right, or Centered: These are self-explanatory.
 Rev. Alternating: Alternating, beginning on the left side.
Vertical Position
Alters the vertical alignment on the page. You can choose either: Top or Bottom.
Page Offset
This value is added to each actual page number, for display purposes. This can be
useful when writing a piece consisting of several parts, which are saved as separate
project files. To retain continuous page numbers throughout the score, you can set this
parameter to the number of pages contained in all preceding parts (project files).
Horizontal Distance
The horizontal distance from the outermost printing position on the page. This is only
relevant for page numbers with the Horizontal Position parameter set to Alternating or
Rev. Alternating.
Vertical Distance
The vertical distance to the highest or lowest printing position on the page (dependent
on whether Vertical Position is set to Top or Bottom).
Hide 1st Page Number
Prevents the display (and printout) of the page number on the first page (all others are
displayed and printed).
Prefix
Allows you to enter text which will be displayed with every page number.