User guide

956 Chapter 38 Working in the Environment
Value Byte Format
The unused bits of the transfer in nibbles (X in 0XXXNNNN) are sent with the
information at the relevant positions of the SysEx strings. If you want to transfer these
deleted bits, you will need to enter zeros in the SysEx string.
Value option Result
Auto The value is sent as one byte if the value range maximum is 127 or less. If the
maximum is higher than 127, the value is sent as two bytes, the MSB (most
significant byte) first.
One Byte The value is sent as one byte.
MSB/LSB The value is sent in two bytes, with the MSB (most significant byte) first.
LSB/MSB The value is sent in two bytes, with the LSB (least significant byte) first.
BCD 4 LSB The value is sent as Binary Coded Decimal in four bytes, in the order 1, 10, 100,
1000.
BCD 4 MSB The value is sent as Binary Coded Decimal in four bytes, in the order 1000, 100,
10, 1.
2 Nibbles L The value is sent in two nibbles, with the least significant nibble first.
3 Nibbles L The value is sent in three nibbles, with the least significant nibble first.
4 Nibbles L The value is sent in four nibbles, with the least significant nibble first.
2 Nibbles M The value is sent in two nibbles, with the most significant nibble first.
3 Nibbles M The value is sent in three nibbles, with the most significant nibble first.
4 Nibbles M The value is sent in four nibbles, with the most significant nibble first.
2 ASCII M The value is sent in two nibbles, the most significant nibble first; the nibbles are
sent in ASCII format for the hex value. As an example, the value $7F (= 127 in
decimal) will be transmitted as a 7 and F.
3 ASCII M same as 2 ASCII M, but in 3 nibbles.
4 ASCII M same as 2 ASCII M, but in 4 nibbles.