User guide

974 Chapter 39 Project Settings and Preferences
MIDI Settings
The MIDI project settings determine the behavior of the MIDI inputs and outputs. The
MIDI project settings comprise the General, Input Filter, and Chase tabs.
General Tab
Send After Loading Project
 Used instrument MIDI settings checkbox: Sends the active instrument MIDI settings
automatically after loading a project (see “Adding Program Change, Volume, and Pan
Settings to a MIDI Region” on page 256).
 All fader values checkbox: Sends all Environment fader values automatically, once a
project is loaded.
Scrubbing with Audio in Arrange
You must enable this setting if you want to simultaneously scrub MIDI and audio
regions in the Arrange window.
SysEx with MIDI Thru function
Incoming SysEx messages are passed through the computer to the MIDI outputs, along
with other MIDI data. This is particularly important when using hardware programmers,
as you can immediately monitor parameter changes to the synthesizer you are editing.
If you want to record SysEx dumps, do not select this checkbox. It rarely makes sense to
divert dumps through the computer unless you want to record a dump, and
simultaneously transmit it to a second device of the same type.