Setup guide

Chapter 10: Digital Performer 29
Chapter 10: Digital Performer
You can use Artist Series controllers with Digital Performer (version 6.0.1 and higher) from MOTU.
For Digital Performer to communicate with Artist media controllers, the EUCON driver must be added in the Control Surface
dialog.
To enable EuControl in Digital Performer:
1 Open Digital Performer.
2 Choose Setup > Control Surface Setup. The Control Surface dialog opens.
3 Click the + button (add) on the right. A pull-down list with Drivers appears with EUCON at the top.
4 If EuCon is not already selected, choose it from the pull-down list.
5 Click OK.
Your Artist media controller now controls Digital Performer.
Download the latest version of Digital Performer from MOTU’s web site. Digital Performer must be installed prior to installing Eu-
Control. Always check with the manufacturer for the most recent software, requirements, and instructions.
Control Surfaces Dialog
Control Surface dialog with EUCON added
A single EUCON driver will communicate with all of your Artist media controllers, so do not add more than one.