Setup guide

Chapter 11: Nuendo 35
Fast Forward/Rewind The FF/RW buttons function as EuCon Momentary/Latch-Switches. If the button is pressed and released
quickly, the switches do NOT latch but behave momentarily, resembling the way these buttons work in the Nuendo GUI. If the
Artist media controller’s FF/RW buttons are held down longer than the latch time set in the Preferences-Setup page, they latch.
Number of Knob Sets to Cache
Nuendo creates knob sets for EQ, Dynamic, Inserts, Aux sends and other functions. A certain number of these knob sets are kept,
or cached, in RAM. For large projects on a large control surface, increasing the number of knob sets in the cache can access them
faster but uses more RAM. It is rare to change this value.
Tips and Shortcuts
Instantiate and Control Any Plug-in
Placing plug-ins on a track and controlling them from the Artist Series controller can speed up your workflow. Controlling a
plug-in with knobs instead of a mouse not only provides more intuitive, higher resolution control, but can also control multiple
parameters simultaneously. You can dial in settings or automate plug-in control without mousing around or drawing lines in the
arrange window.
To work with plug-ins:
1 Select a track on the Artist media controller.
2 Press the INSERTS key (MC Mix) or the INSERTS knob top (MC Control).
3 Press both PAGE keys simultaneously to enter Config mode.
4 Push the Knob Top beside the Insert you wish to assign the plug-in to.
5 Push the type for the type of plug-in you wish to instantiate.
6 Press the Knob Top to select the actual plug-in.
7 Press the Knob Top to select the channel format.
8 Press both PAGE keys simultaneously to exit Config mode.
9 Push the Knob Top to open the plug-in.
10 Control plug-in parameters; press the PAGE keys to access more.
11 Press the BACK key to close plug-in.
Toggle Steinberg Plug-in Presets
You can see your plug-in presets for proprietary Steinberg plug-ins on Artist Series controllers to quickly find your starting point
for effects processing.
To toggle plug-in presets:
1 Select a track on the Artist Series controller.
2 Press the INSERTS knob set selector (MC Mix) or the INSERTS knob top (MC Control).
3 Open a Steinberg VST 3 plug-in.
4 Press the PAGE keys simultaneously to enter config mode. Plug-in presets spill across knobs.
5 Select a preset.
6 Press the two PAGE keys simultaneously to exit config mode.
7 Press the BACK key to exit the plug-in.