Setup guide

Chapter 11: Nuendo 37
Quick Controls
(Nuendo 5 Only)
Quick Controls for the selected track are now accessible from the surface.
To use Quick Controls with MC Control:
1 From top level knob set, press PAGE >.
2 Press the QC knob top.
Each of the selected track’s eight Quick Controls are displayed and can be adjusted with the encoders.
To use Quick Controls with MC Mix
 Press and hold the EQ knob set selector until it blinks and then release.
Each of the selected track’s eight Quick Controls are displayed and can be adjusted with the encoders.
VSTi Controls
(Nuendo 5 Only)
VSTi parameters are now accessible from the surface for Synth and Instrument tracks. They can be changed using CFG mode on
instrument tracks.
To access VSTi parameters on MC Control:
1 Select an instrument track.
2 From the top level knob set, press PAGE >.
3 Press the VSTi knob top.
Parameters for the instrument on the selected track are displayed and can be adjusted with the encoders.
To access VSTi parameters on MC Mix:
1 Select an instrument track.
2 Press and hold the INSERTS knob set selector until it blinks, then release.
Parameters for the instrument on the selected track are displayed and can be adjusted with the encoders.
MIX and GROUP Knob Sets
(Nuendo 5 Only)
The MIX and GROUP knob sets now access Nuendo’s Direct Routing features.
To access Direct Routing:
1 Select a track.
2 Press the MIX knob set selector.
Selected routing is displayed in the top-left knobcell.
•The SEL key toggles between summing mode and intercancel.
•The ON button enables the routing destination.
3 Press the top-left knob top to display routing selections.
4 Press a knob top to select the desired destination.