Setup guide

Appendix B: Pro Tools (HUI) 51
Setting up Pro Tools to Use HUI
To set up Pro Tools:
1 Launch Pro Tools.
2 Choose Setup > Peripherals. The Peripherals dialog opens.
3 Click the MIDI Controllers tab.
4 Configure a HUI controller for each Artist media controller in your network (up to four).
5 Select HUI from the Type pop-up menu for each controller to configure.
6 Configure each controller to have the input and output MIDI ports set for Pro Tools in the Euphonix Preferences Pane by doing
the following:
• Click on the Receive From and Send To pop-up menus.
• Hover over Predefined.
– and –
• Select the Euphonix MIDI ports.
For example, if you set Pro Tools to use MIDI ports 1–4, your first HUI controller’s receive and transmit ports should be set to
EphMIDIEP1.
7 Select 8 from the Ch # pop-up menu as the number of channels for each controller.
8 Click OK. Pro Tools updates the channel and track information and transmits that to the Artist media controllers.
Pro Tools Peripherals dialog
Excerpt from Pro Tools MIDI menu