Manual

118 Chapter 5 Navigating Your Project
To customize the Transport bar:
1 Control-click (or right-click) the Transport bar, and choose Customize Transport Bar from
the menu.
2 Turn on or turn off the desired functions by clicking on the checkboxes in the
Customize dialog.
Transport Buttons
This area contains checkboxes for buttons that literally transport the playhead through
the project. Please see “Using the Transport Buttons” on page 108 (in this chapter) for
an explanation of the individual functions and commands.
Display Area
This section primarily serves to inform you of the playhead and locator positions, but
can also be used to navigate through the project.
 Positions (SMPTE/Bar): Indicates the current position of the playhead. The top row
shows the position in SMPTE format (hours : minutes : seconds : frames), the bottom
row in bars, beats, divisions, and ticks.
 Locators (Left/Right): The top row indicates the left locator position, the bottom row
the right locator position. Locators are used to define a particular section of the
project for a number of recording or playback tasks.