User Guide

130 Chapter 6 CM Labs Motormix
WINDOW/
tool button
LED on
Window Select mode: Select buttons open, assign key focus, or close a particular
window type.
LED off: If the window is not open, the button opens it.
LED on: If the window is open, but does not have key focus, the button activates it.
LED flashes: If the window has key focus, the button closes it.
 1: Arrange window
 2: Mixer
 3: Event List
 4: Score Editor
 5: Hyper Editor
 6: Piano Roll Editor
 7: Transport Bar window
 8: Audio Bin
WINDOW/
tool button
flashes
Select Tool mode: Select buttons choose a tool.
 1: Pointer
 2: Pencil
 3: Eraser
 4: Text tool
 5: Scissors
 6: Glue tool
 7: Solo tool
 8: Mute tool
PLAY/
transport
button
flashes
Transport section mode
 1: Record
 2: Pause
 3: Stop
 4: Play
 5: Rewind
 6: Fast Forward
 Upper LCD row displays current playhead position.
STOP/locate
button
flashes
Locate mode
 1: Goes to left locator.
 2: Goes to right locator.
 3: Enables or disables Cycle mode.
 4: Enables or disables Autopunch mode.
 5: Enters Marker mode (see below).
 6: Opens Marker List.
 Upper LCD row displays current playhead position.
Marker
mode
 1 to 6: Select markers 1 to 6. Marker names are displayed in the upper LCD row.
 7: Creates a new marker.
 8: Deletes selected marker.
Group Edit
mode
Switches between group parameters. Parameter display can be shifted by the View left
and right buttons when the SHIFT button is held down.
Effect Assign
mode
Enters Effect Edit mode for the selected channel.
Effect Edit
mode
Enables/disables the selected parameter, or resets it to the default value.
Mode Assignment