User Guide

Chapter 13 Mackie HUI 179
AUTO MODE Section
STATUS/GROUP Section
Control Assignment
READ Sets selected channel to Read automation mode. While held down, pressing the
channel strip AUTO button sets the automation mode to Read.
OPTION/ALL Sets all channels to Read automation mode.
LATCH Sets selected channel to Latch automation mode. While held down, press the
channel strip AUTO button to set automation mode to Latch.
OPTION/ALL Sets all channels to Latch automation mode.
TRIM —
TOUCH Sets selected channel to Touch automation mode. While held down, press the
channel strip AUTO button to set automation mode to Touch.
OPTION/ALL Sets all channels to Touch automation mode.
WRITE Sets selected channel to Write automation mode. While held down, press the
channel strip AUTO button to set automation mode to Write.
OPTION/ALL Sets all channels to Write automation mode.
OFF Sets selected channel to Off automation mode. While held down, press the channel
strip AUTO button to set automation mode to Off.
OPTION/ALL Sets all channels to Off automation mode.
Control Assignment
AUTO While held down, the scribble strips display the automation mode of all channels.
MONITOR —
PHASE—SHIFT Switches to Single view.
GROUP Enters Group Edit mode:
 The upper line (in the DSP Edit section) displays the number and name of the
group being edited.
 DSP Select buttons 1 to 4 switch between the properties of the group being
edited. The group name is shown in the lower line.
 When the INSERT/PARAM button is off, the DSP Edit V-Pots scroll through the
group properties. If the INSERT/PARAM button is on, the DSP EDIT V-Pots select
the group that you’d like to edit.
 The SELECT buttons enable/disable group membership of the channel.
SHIFT/ADD Switches to Channel view.
CREATE Creates a new group and enters Group Edit mode (see above).
SHIFT/ADD Switches to Mixer view.
SUSPEND Activates or deactivates the Group Clutch.
SHIFT/ADD Switches to Tracks view.