User Guide

211

18 Tascam US-428 and US-224

Setting Up Your Tascam US-428 and US-224

The following section outlines the steps required to use your Tascam US-428 or US-224

control surfaces with Logic Pro.

To set up your Tascam US-428 or US-224 devices in Logic Pro:

1 Install the latest version of the driver software needed for the US-428 and US-224.

2 Ensure that your US-428 or US-224 units are connected to the computer via USB.

3 Open Logic Pro.

The units will be scanned for, and installed, automatically.

Assignment Overview

A modifier button (such as NULL) shown below a button description indicates that the

button has an alternate function/use, while holding down this modifier.

Note: The US-224 only offers four channel strips and Transport controls, but lacks the

EQ, and Master sections (excluding the NULL button and data wheel) of the US-428.

Many operations listed below are specific to the additional controls of the US-428, and

cannot be performed with the US-224.