User Guide

Chapter 19 Yamaha 01V96 217
LCD Function
LCD
The LCD displays different data, depending on the page selected with the F2, F3, and
F4 buttons:
Insert Display Mode
Press the [F2] button to select Insert Display mode. In this mode, the LCD displays
parameters, allowing you to edit effects. This mode also allows you to switch between
different Insert slots, enabling each effect to be edited.
Control Assignment
Left/Right buttons Effect Edit mode: Shifts parameter display by the number of parameters shown
in the control surface group (usually four).
DAW ALT/FINE Effect Edit mode: Shifts parameter display by one.
F1 Clears Overload LEDs.
DAW SHIFT/ADD Switches to Mixer, and displays MIDI channels.
DAW ALT/FINE Opens or closes Arrange window.
Display Assignment
TIME CODE option Active if counter is displaying SMPTE time code.
FEET Not assigned.
BEATS option Active if counter is displaying bars/beats/divisions/ticks.
Counter display Displays either SMPTE time code or bars/beats/divisions/ticks.
SELECT ASSIGN Displays the encoder assignment as follows:
Pan, Snd1 to Snd8, S1As to S8As, In, Out.
ASSIGN —
COMPARE Switches display between “track name/parameter name” and “parameter name/
parameter value” modes.
BYPASS Switches bypass status of effect currently being edited.
INSERT/PARAM Switches between Effect Assign and Effect Edit modes.