User Guide

220 Chapter 19 Yamaha 01V96
DAW WIN TRANSPORT Opens or closes the Transport bar window.
DAW BANK– Shifts channel strips by one bank (a bank is group of channels or
parameters) to the left.
DAW BANK+ Shifts channel strips by one bank to the right.
DAW SHIFT/ADD Shifts to second use of some buttons. See descriptions of other buttons.
DAW OPTION/ALL While held down, value change mode is set to full: Turning the encoder to
the right sets the maximum value. Turning it to the left sets the minimum
value. The encoder also stops at its default value. Also see description of
other buttons.
DAW GROUP STATUS Enters Group Edit mode:
 The upper line in the display shows the number and name of the group
currently being edited.
 Parameter control buttons 1 to 4 switch between properties of the
currently edited group. Group name is shown in the lower line.
 When INSERT/PARAM is set to INSERT, the left and right Tab Scroll buttons
scroll through the group properties. At other times, it selects a group for
editing.
 The SELECT buttons enable/disable group membership of the channel.
DAW SHIFT/ADD Switches to Channel view.
DAW SUSPEND Enables or disables the Group Clutch.
DAW SHIFT/ADD Switches to Extended Channel view.
DAW CREATE GROUP Creates a new group, and enters Group Edit mode (see above).
DAW SHIFT/ADD Switches to Mixer view.
DAW WIN MIX/EDIT Switches between the Arrange and Mixer windows.
DAW CHANNEL – Shifts channel strips by one channel to the left.
DAW CHANNEL+ Shifts channel strips by one channel to the right.
DAW CTRL/CLUTCH While held down, the Group Clutch is engaged (all groups are disabled).
DAW ALT/FINE While held down, value change mode is set to fine: value changes work at
maximum resolution. Also see description of other buttons.
DAW MONI STATUS —
DAW UNDO Performs an Undo (of the last editing operation).
DAW SHIFT/ADD Performs Redo (of the last Undo operation).
DAW OPTION/ALL Opens Undo History window.
DAW SAVE Saves the project.
DAW WIN MEM-LOC Opens or closes the Marker List.
DAW OPTION/ALL Performs a Save As operation, allowing you to save the project with a
different name.
DAW EDIT TOOL Selects the next tool. While held, numerical buttons select a specific tool.
DAW WIN INSERT Opens or closes the Sample Editor.
DAW REC/RDY ALL Disable Record Enable for all channels.
Control Assignment