User Guide

224 Chapter 20 Yamaha 02R96
Assignment Overview
A modifier button (such as SHIFT) below a button description indicates that the button
has an alternate function, while holding down this modifier.
DISPLAY ACCESS Section
AUX SELECT Section
ENCODER MODE Section
FADER MODE Section
Control Assignment
METER Clears Overload LEDs.
Control Assignment
AUX 1 Assigns Send 1 level to encoders, and Send 1 to 4 levels to rotary knobs shown in
display. While held, the channel strip displays show the current Send 1 destination
assignment.
AUX 2 Assigns Send 2 level to encoders, and Send 1 to 4 levels to rotary knobs shown in
display. While held, the channel strip displays show the current Send 2 destination
assignment.
AUX 3 Assigns Send 3 level to encoders, and Send 1 to 4 levels to rotary knobs shown in
display. While held, the channel strip displays show the current Send 3destination
assignment.
AUX 4 Assigns Send 4 level to encoders, and Send 1 to 4 levels to rotary knobs shown in
display. While held, the channel strip displays show the current Send 4 destination
assignment.
AUX 5 Assigns Send 5 level to encoders, and Send 5 to 8 levels to rotary knobs shown in
display. While held, the channel strip displays show the current Send 5 destination
assignment.
Control Assignment
PAN Assigns pan to encoders; assigns selected channel’s pan/surround parameters to
display encoders.
AUX Assigns Send 1 level to encoders, and Send 1 to 4 levels to DSP encoders. While held,
the channel strip displays show the current Send 1 destination assignment.
Control Assignment
FADER Enables or disables Flip mode.
AUX/MTRX Enables or disables Flip mode.