User Guide

232 Chapter 21 Yamaha DM1000
LCD Insert Page
Data Entry Section
Control Assignment
COMPARE Switches display between “track name/parameter name” and “parameter
name/parameter value” modes.
BYPASS Activates or deactivates bypass of plug-in insert currently being edited.
INSERT/PARAM Switches between Plug-in Assign and Plug-in Edit modes.
Parameter control 1–4
buttons
Pan Assignment mode:
 Parameter control 1 button centers pan or surround angle.
 Parameter control 2 button centers surround diversity.
 Parameter control 3 button resets surround LFE level.
 Parameter control 4 button resets spread.
Send Assignment mode:
 Enables/Disables Sends 1 to 4 or Mutes 5 to 8.
Plug-in Assignment mode:
 Confirms the plug-in selection for Insert slots 1 to 4 or 5 to 8, and enters
Plug-in Edit mode for the selected Insert slot.
Plug-In Edit mode:
 Sets value to default, or sets bi-polar switch on/off.
Parameter controls Pan Assignment mode:
 Parameter control 1 edits pan or surround angle.
 Parameter control 2 edits surround diversity.
 Parameter control 3 edits surround LFE level.
 Parameter control 4 edits spread.
Send Assignment mode:
 Control Send 1 to 4 or 5 to 8 Level.
Plug-in Assignment mode:
 Assigns Insert 1 to 4 or 5 to 8.
Plug-in Edit mode:
 Sets value to default.
Control Assignment
Parameter wheel Default: Move playhead by one bar.
Scrub: Scrubbing
Shuttle: Shuttle mode
– (DEC) Default: Exits folder.
In Go to Marker dialog: Cancels dialog.
DAW ALT/FINE Opens or closes Audio Bin.
+ (INC) Enters selected folder.