User Guide

Chapter 2 Customizing Controller Assignments 39
To open the Controller Assignments window in Expert view:
m Click the Expert view button.
In Expert view, the Controller Assignments window contains the following fields,
menus, and buttons—used to edit assignment parameters, and define zones and
modes.
 Zone list: Displays the available zones for the device. The first entry “(No Zone)” is for
zoneless assignments—assignments that are always active, regardless of the active
zone. Click a zone in the list to see its modes (in the Mode list), and its current
assignments (in the Control/Parameter list). You can also double-click a zone to
rename it.
 Mode list: Displays the modes for the currently selected zone. The first entry “(No
Mode)” is for modeless assignments. Click a mode in the list to see its assignments in
the Control/Parameter list, and make it the selected zone’s active mode. You can also
double-click a mode to rename it.
 Control/Parameter list: Select the assignment you want to edit. The left column
displays the name of the control, and the right column displays the name of the
parameter being controlled (in an abbreviated form). The parameters of the selected
assignment appear in the fields to the right of the list. See “Controller Assignment
Parameters” on page 40.
Note: You can select multiple assignments in the list, but only the parameters of the
first selected assignment are displayed. When multiple assignments are selected:
operations performed in the Edit menu can be applied to all selected assignments. All
other operations only apply to the first assignment.
 Controller Assignment Parameter: All aspects of the selected controller assignment
parameter are shown—and can be changed—in this area.