User Guide

96 Chapter 3 Mackie Control
Assignment Overview
The following assignment tables are broken down into zones of the Mackie Control.
DISPLAY Buttons
Channel Strip Controls (1 through 8)
Button Modifier Function/Comments
NAME/VALUE — Switch between parameter name and parameter value display.
SHIFT Cycle through level meter displays: vertical, horizontal, and off.
OPTION Switch between track name and track number:name display.
CONTROL Clear clip/overload flags.
x/ALT Enter control surface group settings mode.
SMPTE/BEATS — Switch between SMPTE and beat format in clock display.
Control Modifier Function/Comments
Turning V-Pot — Modify parameter displayed in LCD.
OPTION Set parameter to minimum, default, or maximum value.
x/ALT Modify parameter at high resolution.
Pressing V-Pot
button
— Set parameter displayed on LCD to default value, or: Switch between
two possible values.
Flashing pre-selection:
— Enter the pre-selected value.
Menu options:
— Enter whatever option is visible in display.
If track is folder:
— Enter folder.
REC/RDY button — Activate/deactivate Record Enable button of track.
OPTION Disable Record Enable button for all tracks.
SOLO button — Activate/deactivate Solo button of track’s channel strip.
OPTION Disable Solo button for all channel strips.
In Send Destination/Level Mixer view:
— Switch pre/post status of selected send.
In Send Destination/Level Channel view:
— Switch between pre/post of send on selected channel strip.