Owner's manual

To manually create a ReWire object in the Environment
µ
Choose New > Internal > ReWire.
Apart from common parameters, the Rewire object offers three settings:
• Device pop-up menu: This setting refers to the ReWire application(s) that Logic Pro can
connect to. If one or more ReWire applications are open, the Device parameter displays
the names of these applications.
• Bus pop-up menu: Lets you choose the ReWire bus from all available ReWire busses. If
a ReWire application provides bus names, they are shown. If using Reason, the names
of the instruments available in the Reason Rack are shown from Bus 6 upward, in place
of numbers.
• Channel pop-up menu: Sets the MIDI channel of the ReWire object.
1141Chapter 37 Environment Objects Reference