10.6

156Control Surfaces Support Guide
Radikal Technologies SAC-2K Channel view controls in
Logic Pro
The table outlines the Channel view controls and their assignments:
Control Assignment
EQs Enters Channel view EQ Edit mode. Pressing the button repeatedly cycles
through all available EQ parameter pages.
Inserts/Sends Enters Channel view Plug-in Edit mode and edits the effect plug-in
inserted into the currently chosen Insert slot (of the selected channel).
Pressing the button repeatedly cycles through all available effect plug-in
parameter pages.
Dynamics —
MIDI —
Instrument Enters Channel view Instrument Edit mode and edits the instrument plug-
in inserted into the selected (Instrument) channel. Pressing the button
repeatedly cycles through all available instrument plug-in parameter
pages.
Radikal Technologies SAC-2K troubleshooting in
Logic Pro
This section may help you to resolve a few common problems.
• Track or channel names are shorter than necessary, and the assignments don’t work
correctly
The SAC-2K is in an Emulation mode (Logic Control or HUI, for example). To resolve this
issue, turn the SAC-2K power off, and then back on.
• The faders don’t work, and the locator display shows “00000000”
You have manually switched the SAC-2K to PASSIVE mode. This has the unfortunate
side effect of not initializing a number of settings required for proper communication.
To resolve this issue, turn the SAC-2K power off, and then back on.