10.6

178Control Surfaces Support Guide
Control Modifier Assignment
F2 Selects Yamaha 01V96 Insert
display mode in Logic Pro.
F3 Selects Yamaha 01V96 Channel
display mode in Logic Pro.
F4 Selects Yamaha 01V96 Meter
display mode in Logic Pro.
01V96 LCD display modes
Yamaha 01V96 Insert display mode in Logic Pro
Press the F2 button to select Insert display mode. In this mode, the LCD displays effect
edit parameters. This mode also allows you to switch between different Insert slots,
enabling each effect to be edited.
Display Assignment
TIME CODE Active if counter is displaying SMPTE timecode.
BEATS Active if counter is displaying bars/beats/divisions/ticks.
Counter Displays either SMPTE timecode or bars/beats/divisions/ticks.
SELECT ASSIGN Displays the encoder assignment as follows: Pan, Snd1 to Snd8, S1As to
S8As, In, Out.
COMPARE Switches the display between “track name/parameter name” and
“parameter name/parameter value” modes.
BYPASS Switches the bypass state of plug-in currently being edited.
INSERT/PARAM Switches between Plug-in Assign and Plug-in Edit modes.
Selecting virtual encoders 1 to 4
(Use cursor keys, and then press
ENTER button.)
Pan Assignment mode:
• Parameter control 1 button centers pan or surround angle.
• Parameter control 2 button centers surround diversity.
• Parameter control 3 button centers surround LFE level.
• Parameter control 4 button resets spread.
Send Assignment mode:
• Enables or disables Sends 1 to 4 or 5 to 8.
Plug-in Assignment mode:
• Confirms the plug-in selection for Insert slots 1 to 4 or 5 to 8, and
enters Plug-in Edit mode for the selected Insert slot.
Plug-In Edit mode:
• Sets value to default, or switches buttons with two states.