10.6

62Control Surfaces Support Guide
M-Audio iControl Master fader in Logic Pro
Move the Master fader on the iControl to set the level of the Master fader in the Logic Pro
Mixer. The Master fader changes the level of all output channels, but does not affect the
relative levels of channels that precede the Master fader in the signal path. Move the fader
left to decrease the master level, or to the right to increase the master level.
iControl assignments
Overview of M-Audio iControl assignments in Logic Pro
The assignment tables show all assignments for each control, both with and without the
Option button for the Assignment buttons and channel strip controls and the Cycle button
for the Jog Wheel and transport buttons.
• M-Audio iControl Assignment button functions in Logic Pro
• M-Audio iControl channel strip functions in Logic Pro
• M-Audio iControl Jog Wheel functions in Logic Pro
• M-Audio iControl transport functions in Logic Pro
M-Audio iControl Assignment button functions in Logic Pro
The Assignment buttons in the All Tracks and Selected Track areas define the behavior of
the channel strip controls.
iControl button Modifier Function/Comments
Volume — Encoders control channel’s Level
fader.
Pan — Encoders control channel’s Pan/
Balance control.
Generator — Encoders control software
instrument parameters.
Track Info — Encoders control channel strip
parameters.
EQ — Encoders control EQ parameters.
Effect 1 — Encoders control Insert 3
parameters.
Effect 2 — Encoders control Insert 4
parameter.
Option — Modifier for other controls; while
held down, the modified control
either applies the function to
all channel strips, or sets the
parameter to its minimum, default,
or maximum value.
Arrow Up/Arrow Down — Shift fader bank left/right by number
of channel strips.