10.6

126Logic Pro Effects
Vintage Tube EQ lower unit parameters
• In/Out switch: Turn the EQ circuit on or off.
• Low Freq knob: Set the low range center frequency to 0.2, 0.3, 0.5, 0.7, or 1.0 kHz,
or values between these increments.
• Low Peak knob: Set the amount of low frequency boost, up to 10 dB.
• Dip Freq knob: Set the Dip (attenuation) center frequency to 0.2, 0.3, 0.5, 0.7, or 1.0,
1.5, 2, 3, 4, or 5 kHz, or values between these increments.
• Dip knob: Set the amount of attenuation (cut) for the selected Dip frequency, up to
10 dB.
• High Freq knob: Set the high range center frequency to 1.5, 2, 3, 4, or 5 kHz, or values
between these increments.
• High Peak knob: Set the amount of high frequency boost, up to 8 dB.