10.6

238Logic Pro Effects
Logic Pro Rotor Cabinet effect mic processing controls
The Rotor Cabinet effect provides the following microphone processing parameters.
Mic processing parameters
• Mic Position switch: Choose either the front or rear position for the virtual microphone.
See Logic Pro Rotor Cabinet effect microphone types.
• When Real Cabinet is chosen in the Type pop-up menu:
• Horn knob: Set the stereo width of the Horn deflector microphone.
• Drum knob: Set the stereo width of the Drum deflector microphone.
• When other cabinets are chosen in the Type pop-up menu:
• Distance knob and field: Determine the distance of the virtual microphones (the
listening position) from the emulated speaker cabinet. Turn to the right for a darker
and less defined sound.
• Angle knob and field: Define the stereo image, by changing the angle of the
simulated microphones between 0 and 180 degrees.
• Balance knob and field: Set the balance between the horn and drum microphone signals.
Logic Pro Scanner Vibrato effect
Scanner Vibrato simulates the scanner vibrato section of a Hammond organ. Scanner
Vibrato is based on an analog delay line consisting of several lowpass filters. The delay
line is scanned by a multipole capacitor that has a rotating pickup. It is a unique effect
that cannot be simulated with simple LFOs.
You can choose between three different vibrato and chorus types. The stereo version of
the effect features two additional parameters—Stereo Phase and Rate Right. These set
the modulation speed independently for the left and right channels.