10.6

58Logic Pro Effects
Delete a tap
In Logic Pro, do one of the following:
• Select a tap, then press the Delete key.
• In the Identification bar, drag a tap letter downward, out of the Tap display.
This method also works when more than one tap is selected.
Delete all selected taps
• In Logic Pro, Control-click (or right-click) a tap, then choose “Delete tap(s)” from the
shortcut menu.
Edit in the Logic Pro Delay Designer Tap display
You can graphically edit any tap parameter that is represented as a vertical line in the Tap
display. The Tap display is ideal if you want to edit the parameters of one tap relative to
other taps or when you need to edit or align multiple taps simultaneously.
Edit a tap parameter in the Tap display
1. In Logic Pro, click the view button of the parameter you want to edit.
2. Vertically drag the bright line of the tap you want to edit (or one of the selected taps,
if multiple taps are selected).
If you selected multiple taps, the values of all selected taps are changed relative to
each other.
Note: The method outlined above is slightly different for the Filter Cutoff and Pan
parameters. See the tasks below.