8
Table Of Contents
- Logic Pro 8 Control Surfaces Support
- Contents
- Introduction
- Basic Control Surface Setup
- Customizing Controller Assignments
- Mackie Control
- Setting Up Your Mackie Control
- Using the Mackie Control With Logic Pro
- Display Zone
- Channel Strip Controls
- Master Fader
- Assignment Zone
- Fader Bank Zone
- Function Key Zone
- Global View Zone
- Modifier Buttons
- Automation Buttons
- Utilities Buttons
- Transport Zone
- Cursor Key Zone
- Jog/Scrub Wheel Zone
- Programmable User Modes
- Connecting Foot Switches
- Assignment Overview
- M-Audio iControl
- EuCon Support of Euphonix MC and System 5-MC
- CM Labs Motormix
- Frontier Design TranzPort
- JLCooper CS-32 MiniDesk
- JLCooper FaderMaster 4/100
- Korg microKONTROL and KONTROL49
- Mackie Baby HUI
- Mackie C4
- Mackie HUI
- Radikal Technologies SAC-2K
- Roland SI-24
- Tascam FW-1884
- Tascam US-2400
- Tascam US-428 and US-224
- Yamaha 01V96
- Yamaha 02R96
- Yamaha DM1000
- Yamaha DM2000
Chapter 5 EuCon Support of Euphonix MC and System 5-MC 119
 Left Wheel/Right Wheel: The commands found here allow you to configure the left or
right wheel to perform a certain action when turned. This includes; horizontal or
vertical zoom, waveform zoom, individual track zoom, move locators, adjust left
locator, adjust right locator, move punch locators, adjust punch in or punch out
positions, move markers, adjust marker lengths, nudge selected regions or events,
left/right pan (surround X), and front/back pan (surround Y).
 Project > Markers: All markers defined in the open project are shown as a list.
Assigning a Soft Key to a marker displays the marker title on the Soft Key LCD display.
Pressing the Soft Key will move the playhead to the marker start point. The Soft Key
is illuminated while the playhead is within the marker boundaries. Renaming a
marker in Logic Pro also changes the associated Soft Key title. Moving a marker,
however, disconnects the Soft Key from the marker.
 Transport: All transport related key commands are found here.
Note: Marker Soft Keys are a part of the Application Set, not the project data. Don’t
forget to save the User Set after defining a Marker Soft Key.
Main-Tracks Touchscreen
The MC Main-Tracks Touchscreen always displays project channels in the Mixer’s
Arrange view:
 The channels are laid out in the same order as in the Arrange window.
 Redundant tracks are not accessible—where multiple tracks are routed to/represent
the same channel.
Note: Filtered selections (different view modes) are not reflected on the MC Main-
Tracks Touchscreen.
The transport information is displayed as follows:
 SMPTE clock
 Bars/beats time
 Left locator
 Right locator
Main-Layouts
Layouts are automatically saved with the Logic Pro project. When re-loading a project,
all defined layouts are available.