8

Chapter 2 Customizing Controller Assignments 43
The following list illustrates one possible arrangement of zones and modes, which
shows how you can define them, hierarchically:
Defining Zones and Modes
You can only define Zones and Modes in the Expert view.
To define a zone:
1 Click the Add button at the lower-left corner of the Zone list.
A new, blank zone appears in the Zone list. It is highlighted, allowing you to
immediately rename it.
2 Type a name for the zone.
If you would like to add controllers to a zone, see “Assigning Controllers in Expert View”
on page 41.
To define a mode:
1 Click the Add button at the lower-left corner of the Mode list.
A new, blank mode appears in the Mode list. It is highlighted, allowing you to
immediately rename it.
2 Type a name for the mode.
If you would like to add controllers to a mode, see “Assigning Controllers in Expert
View” on page 41.
Modal Assignment A
Modal Assignment B
Mode 1 (inactive)
Mode 2 (active)
Modal Assignment A
Modal Assignment B
Modal Assignment C
Modal Assignment A
Mode 3 (inactive)
Modal Assignment A
Mode 4 (active)
Mode 5 (inactive)
Modal Assignment A
Modal Assignment B
Modal Assignment C
Modal Assignment D
Zone 1 Zone 2
Modeless Assignment A
Modeless Assignment B