7.2.1

52 Chapter2LogicControl

IntheSendDestination/Levelviews(see“SendAssignmentModes”onpage61),the
SOLObuttoncontrolsthePre/Postmodeselection—inbothMultiChanneland
ChannelStripviews.
MUTEButton
Usedtodefeatthetrack’ssignal.EachchannelfeaturesanindependentMuteLED
whichilluminateswhenatrackismuted.
HoldingdowntheOPTIONbutton,whilepressinganyMUTEbuttonwillunmuteall
tracks.
IntheEQFrequency/GainandSendDestination/Levelviews,theMUTEbuttoncontrols
theEQbypassorSendmutefunction.ThisaffectsbothMultiChannelandChannel
Stripviews.
SELECTButton
Thisbuttonisusedtoselectachannelforchannel-basededitingorassignment
commands.EachchannelfeaturesanindependentSELECTLEDwhichilluminateswhen
atrackisselected.
WhenholdingdowntheSHIFTbutton,pressinganychannelSELECTbuttonwillsetthe
track’svolumetounitylevel(0dB).
WhileholdingdownSHIFT,aSELECTbutton’sLEDindicatesifthetrack’svolumeisset
to0dB.
WhenholdingdowntheOPTIONbutton,pressinganychannelSELECTbuttonwill
createanewtrack(assignedtothesameinstrumentoftheselectedtrack),andswitch
toArrangeview.
WhenholdingdowntheSHIFTandOPTIONbuttons,pressinganychannelSELECT
buttonwillcreateanewtrack(withthenextinstrument,followingtheselectedtrack),
andswitchtoArrangeview.