User manual

-6-
SeriTek/1SM2 CardBus adapter Installation on systems running Mac OS X 10.3 or
later
1. Before inserting the SeriTek/1SM2 into your PowerBook computer, install the appropriate
driver that is located on your SeriTek/1SM2 CD by installing the drivers on the CD.
2. The CD contains two installer applications, one for systems running Mac OS X 10.4.0 or
later, and another for systems running Mac OS X versions prior to 10.4.0. Insert the CD
and click on the appropriate “installer application” for your particular operating system.
3. Insert the SeriTek/1SM2 adapter into an available CardBus slot (see Figure 2). Be sure
the card fully seats. If the metal part of the card is not fully inserted, try turning the card
over and insert again.
Figure 2: Inserting the SeriTek/1SM2
4. Find the Icon that looks like a CardBus card; it should appear next to your other system
status indicators.
Figure 3: CardBus Icon
5. Click on the CardBus Icon ( ), you should see that the system identifies the card as a
storage controller, the SeriTek/1SM2 (see Figure 4). In some circumstances the card
may be identified as Unknown Vendor Mass Storage Controller.