User Guide

Mac mini (Mid 2010) Take Apart — Hard Drive 133
2010-08-03
Reassembly
Be very careful not to
damage the cosmetic
Mylar cover or catch it on
the edge of the housing
opening.
Note: The hard drive has
two pins that secure it to
the internal side wall of
the case.
1 Slide hard drive
assembly into the
case.
2 Maneuver the hard
drive until the pins
secure to the holes in
the case. .
Wiggling the drive
with a black stick
inserted into one of
the top hard drive
screw holes may be
helpful.
The drive should not
move sideways once
secure.
Note the ex cable
proximity to the
bottom drive ex
cable to help align.
3 Make sure the
power supply cable
is connected, then
slide the logic board
assembly back in
place and secure with
screws.
4 Connect all cables to
the logic board.