7-inch MacBook Pro User’s Guide Includes setup, expansion, and troubleshooting information for your MacBook Pro computer
K Apple Computer, Inc. © 2006 Apple Computer, Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple. Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for printing or clerical errors. Apple 1 Infinite Loop Cupertino, CA 95014-2084 408-996-1010 www.apple.
Contents 7 8 16 18 20 22 24 25 26 Chapter 1: Getting Started Setting Up Your MacBook Pro Basic Components of Your MacBook Pro Features of Your MacBook Pro Keyboard Additional Components of Your MacBook Pro Putting Your MacBook Pro to Sleep or Shutting It Down Calibrating Your Battery Getting More Information Getting Answers Using Mac Help 27 28 30 32 33 35 35 40 Chapter 2: Getting to Know Your MacBook Pro Adjusting Your Display Using Your Power Adapter Using the Trackpad Using the Keyboard Using a Mouse
3 44 45 46 46 47 Learning About Mac OS X Customizing Your Desktop and Setting Your Preferences Using Applications When an Application Doesn’t Respond Keeping Your Software Up to Date Connecting to a Printer 48 Playing a CD and Connecting Headphones 49 Connecting a Camera or Other FireWire or USB Device 49 Transferring Files to or from Another Computer 51 52 55 59 60 61 63 64 68 69 74 74 79 4 Chapter 3: Using Your MacBook Pro Using Universal Serial Bus (USB) Devices Connecting with FireWire Using Expres
81 Chapter 4: Adding Memory to Your MacBook Pro 82 Installing Additional Memory 89 Making Sure Your MacBook Pro Recognizes the New Memory 91 Chapter 5: Troubleshooting 92 Problems That Prevent You from Using Your Computer 94 97 99 100 100 Other Problems Reinstalling the Software That Came with Your Computer Using Apple Hardware Test Installing Xcode Tools Locating Your Product Serial Number 101 Appendix A: Specifications 103 103 105 106 108 110 112 Appendix B: Safety, Use, and Care Information Understand
117 Entering Your Information 119 Troubleshooting Your Connection 123 Appendix D: Top Ten Questions 129 Communications Regulation Information 133 Index 6 Contents
1 Getting Started 1 Your 17-inch MacBook Pro includes the following components: ® MENU Apple Remote AC plug 85W MagSafe Power Adapter DVI to VGA adapter AC power cord Important: Read all the installation instructions (and the safety information in Appendix B, “Safety, Use, and Care Information,” on page 103) carefully before you plug your computer into a wall socket.
Setting Up Your MacBook Pro Your MacBook Pro is designed so that you can set it up quickly and start using it right away.
Warning: Make sure the AC plug is fully inserted into the power adapter and the electrical prongs on your AC plug are in their completely extended position before you plug the adapter into the power outlet. AC plug Power adapter plug ¯ Power adapter port ® AC power cord To extend the reach of your power adapter, you can attach the AC power cord. First, pull up on the AC plug to remove it from the adapter, and then attach the included AC power cord to the adapter. Plug the other end into a power outlet.
Note: To use a dial-up connection, you need the external Apple USB Modem, available for purchase from the online Apple Store at www.apple.com/store or from an Apple Authorized Reseller. Plug the Apple USB Modem into a USB port on the MacBook Pro, and then connect a phone cord (not included) from the modem into a phone wall jack.
Step 3: Turn On Your MacBook Pro 1 To turn on the MacBook Pro, press the power (®) button briefly (up to 1 second). You hear a tone when you turn on the computer. Do not press the power button after the startup tone or you might cause the computer to shut down again. When you turn on the computer, you should see the sleep indicator light turn on (and stay on). ® Power button ® Sleep indicator light It takes the MacBook Pro a few moments to start up.
2 Use your MacBook Pro trackpad to select and move items on the screen, just as you use a mouse with a desktop computer. Â To move the arrow pointer on the screen, slide your finger across the trackpad. Important: Use one finger on the trackpad to move the pointer. By default, the trackpad lets you scroll when you drag two fingers across the trackpad. See “Using the Trackpad” on page 32 for more information. Â Use the trackpad button to select, click, or double-click items on the screen.
Problems Turning On the Computer? Nothing happens when you press the power (®) button. Â The battery might be drained. Make sure that you plugged the power adapter firmly into both the computer and a power source. The power adapter plug should light when you plug it into the computer. Â If the computer still doesn’t start up, see “Problems That Prevent You from Using Your Computer” on page 92. You see a picture of a disk or a folder with a blinking question mark.
To transfer information, make sure:  Your other Mac has built-in FireWire and supports FireWire Target Disk Mode  Your other Mac has Mac OS X v10.1 or later installed  You have a standard 6-pin to 6-pin FireWire cable Setup Assistant takes you through the process of transferring your information—just follow the onscreen instructions. Transferring information to your MacBook Pro doesn’t affect the information on your other Mac.
If you don’t intend to keep or use your other Mac, it’s best to deauthorize it from playing music, videos, or audiobooks that you’ve purchased from the iTunes Music Store. Deauthorizing a computer prevents any songs, videos, or audiobooks you’ve purchased from being played by someone else and frees up another authorization for use (you can use only five authorized computers at a time with an iTunes account). For information on deauthorizing, in iTunes open Help > iTunes and Music Store Help.
Basic Components of Your MacBook Pro iSight camera Camera indicator light Built-in stereo speakers Microphone Infrared (IR) receiver ® Sleep indicator light Display release button 16 Trackpad button Chapter 1 Getting Started Trackpad Slot-loading SuperDrive ® Power button
Built-in iSight camera and camera indicator light Videoconference with others using the included iChat AV application. The camera indicator light glows when the video camera is capturing and displaying video. Built-in stereo speakers (2) Listen to music, movies, games, and other multimedia files. Microphone (built in under the left speaker grille) Capture sounds directly with this microphone.
Features of Your MacBook Pro Keyboard ® Function key (fn) — Mute esc F1 Brightness controls 18 F2 F3 F4 - Volume controls Chapter 1 Getting Started F5 num lock C Media i Video Mode Num Lock key control Eject key Toggle key F6 F7 F8 F9 F10 ø Keyboard illumination controls F11 F12 Standard function keys
Function (Fn) key Press and hold to activate customized actions assigned to the function keys (F1 to F12). To learn how to customize function keys, choose Help > Mac Help and search for “function keys.” Brightness controls Increase ( ) or decrease ( ) the brightness of your MacBook Pro display. — Mute control Mute the volume of the sound coming from the built-in speakers and headphone port.
Additional Components of Your MacBook Pro d USB 2.0 f Headphone out/optical digital audio out port ports (2) ¯ Power , Audio line in/optical adapter port Security slot H FireWire 400 port d USB 2.
¯ Power adapter port Plug in the included 85W Apple MagSafe Power Adapter to recharge your MacBook Pro battery. d Three high-speed USB 2.0 (Universal Serial Bus) ports Connect additional equipment to your MacBook Pro, such as printers, digital cameras, modems, and more. (Compatible with standard USB devices.) , Audio line in/optical digital audio in port Connect your MacBook Pro to a line-level microphone or digital audio equipment.
For additional information about these features, see Chapter 3, “Using Your MacBook Pro,” on page 51. Putting Your MacBook Pro to Sleep or Shutting It Down When you finish working with your MacBook Pro, you can put it to sleep or shut it down. Putting Your MacBook Pro to Sleep If you’ll be away from your MacBook Pro for only a short time, put it to sleep. When the computer is in sleep, you can quickly wake it and bypass the startup process.
Warning: Wait a few seconds until the sleep indicator light on the display latch starts pulsing (indicating that the computer is in sleep and the hard disk has stopped spinning) before you move your MacBook Pro. Moving your computer while the hard disk is spinning can damage the hard disk, causing loss of data or the inability to start up from the hard disk. To wake the computer: Â If the display is closed, simply open it to wake your MacBook Pro.
Calibrating Your Battery To get the longest running time from your battery, calibrate it sometime during the first week you have your MacBook Pro and recalibrate occasionally to keep your battery functioning at its fullest capacity. To calibrate your battery: 1 Plug in the power adapter and fully charge your MacBook Pro battery until the light on the power adapter plug changes to green and the Battery icon in the menu bar indicates that the battery is fully charged.
Important: Repeat the calibration process every two months or so to keep your battery fully functioning. If you use your MacBook Pro infrequently, it’s best to recalibrate the battery at least once a month. If you purchased additional batteries, follow the calibration procedure with those batteries as well. For more battery information, see “Using Your Battery” on page 74.
Getting Answers Using Mac Help Most of the information about using your MacBook Pro is available on your computer in Mac Help. To get Mac Help: 1 Click the Finder icon in the Dock (the bar of icons at the bottom of the screen). 2 Choose Help > Mac Help (click the Help menu in the menu bar and choose Mac Help). 3 Click in the search field, type a question, and press Return on your keyboard.
2 Getting to Know Your MacBook Pro 2 This chapter introduces important basics about your MacBook Pro. Whenever you stop using your MacBook Pro, wait a few moments to let the hard disk and any optical disc (such as a CD or DVD) in your drive stop spinning before you transport the computer. Avoid jostling or bumping your MacBook Pro while discs are spinning. Note: Your MacBook Pro uses Sudden Motion Sensor technology to help protect the hard disk if the computer is dropped or shaken.
For more safety instructions about handling and using your MacBook Pro in various locations, make sure to read Appendix B, “Safety, Use, and Care Information,” on page 103. The rest of this chapter includes sections about using components of your MacBook Pro, such as the display, power adapter, trackpad, keyboard, built-in iSight camera, and Apple Remote. You’ll also find information about Mac OS X, Mac Help, applications, and connecting to peripheral devices.
3 By default your system is set to “Reduce the brightness of the built-in display when using this power source.” Deselect this option if you don’t want your display to dim to save on battery consumption. When this feature is enabled, your display dims a small amount when you go from using the power adapter with your MacBook Pro to using battery power. When you plug in the power adapter again, your display returns to its previous level of brightness.
To change your screen resolution using the Displays status menu in the menu bar, click “Show displays in menu bar.” Using Your Power Adapter Plugging in the power adapter provides AC power to the computer and recharges the computer’s battery. Important: For optimal performance, use only the power adapter that came with your computer, or purchase an additional 85W Apple MagSafe Power Adapter.
To extend the reach of your power adapter, first pull the AC plug up to remove it from the adapter. Attach the included AC power cord to the adapter, making sure it is seated firmly. Plug the other end into a power outlet. The AC power cord provides a grounded connection. AC power cord AC plug For best results, always use the AC power cord and connect it to a grounded power outlet when one is available. Use only the AC power cord that came with your power adapter.
Using the Trackpad How far the pointer moves onscreen is based on how quickly you move your finger across the trackpad. To move the pointer a short distance, move your finger slowly across the trackpad; the faster you move your finger, the farther the pointer moves onscreen. You can also adjust the tracking speed in the Keyboard & Mouse pane of System Preferences. You can scroll vertically or horizontally in a window that has scroll bars, by moving two fingers on the trackpad.
Note: If you find that the pointer moves as you type because you accidentally brush the trackpad, you can avoid this problem by selecting the “Ignore accidental trackpad input” option in the Keyboard & Mouse pane of System Preferences. Using the Keyboard Your MacBook Pro keyboard has a numeric keypad integrated into the standard keyboard keys. Keys used for the numeric keypad have a small secondary label.
Your MacBook Pro is equipped with an illuminated keyboard that is adjusted by the ambient light-sensing (ALS) system according to the available light. You can also adjust the keyboard illumination using the F8, F9, and F10 keys. Important: Even when the keyboard illumination feature is on, the keyboard glows only in low-light situations. You can turn off the keyboard illumination feature in the Keyboard & Mouse pane of System Preferences or by pressing the F8 key.
Using a Mouse If you have an Apple mouse with a USB connection, you can insert the USB connector into the USB 2.0 port and use your mouse right away. If you want to use an Apple wireless mouse with Bluetooth® technology, see “Using Bluetooth Wireless Technology” on page 61 for information about connecting it. You can purchase a wireless or USB mouse from the online Apple Store at www.apple.com/store or from an Apple Authorized Reseller.
To use your Apple Remote with Front Row, point it at the IR receiver and: Â Press the Menu (») button to open or close Front Row, or to return to the previous menu when you’re navigating through Front Row. Â Press the Next/Fast-forward (‘) or Previous/Rewind (]) button to cycle through the applications in Front Row. Â Press the Volume/Menu Up (∂) and Volume/Menu Down (D) buttons to move through a menu or adjust the volume.
Using the Apple Remote with Keynote If you have Keynote installed, you can control presentations with the Apple Remote. With Keynote open, press the Select/Play/Pause (’) button to start a presentation. Then, depending on where you want to work in the application (in a presentation or the slide organizer), point the Apple Remote at the IR receiver on your MacBook Pro and press the buttons to control Keynote as described in the following table.
To pair your Apple Remote with your MacBook Pro: 1 Position the Apple Remote 3 to 4 inches from the IR receiver on your MacBook Pro. 2 Press and hold the Menu (») and Next/Fast-forward (‘) buttons on the Apple Remote for 5 seconds. When you successfully pair your Apple Remote with your MacBook Pro, you’ll see a chainlink symbol ( ) onscreen. To delete a pairing between the Apple Remote and your MacBook Pro: 1 Choose Apple () > System Preferences from the menu bar. 2 Click Security and then click Unpair.
To replace the battery: 1 Open the battery compartment by pressing the button (pictured above) with a small object, such as the end of a paper clip. 2 Pull the battery compartment out and remove the battery. 3 Insert the replacement battery with the positive (+) side facing up. 4 Close the battery compartment. Turning Off IR Reception You can use Security preferences to turn IR reception on your MacBook Pro on or off.
Getting More Information About the Apple Remote More information about your Apple Remote is available in Mac Help. Choose Help > Mac Help from the menu bar and search for “Apple Remote.” Using the Built-in iSight Camera With the built-in iSight camera, you can take pictures with Photo Booth or video chat with other iChat AV users. Taking Pictures with Photo Booth Use Photo Booth to take pictures and add fun visual effects such as sepia, black and white, glow, colored pencil, and more.
2 Select an effect to apply to your picture, if you like. 3 Click the camera icon below the image to take a picture. Save the picture as your iChat buddy picture, email it to your friends, or save it in your iPhoto library. To use a picture as your buddy picture or account picture: 1 Open Photo Booth and take a picture. 2 Select the picture you’d like to use as your buddy picture or account picture. 3 Click the Buddy Picture or Account Picture icon to automatically update your picture.
2 Click the camera icon next to a buddy in your buddy list. For information about adding people to your buddy list, choose Help > iChat AV Help. The camera indicator light glows to indicate you are displaying video. Clicking the camera icon also sends an invitation to your buddy to accept your video request and lets you preview how you look on camera. When a buddy accepts your invitation, you can see the buddy on your screen and you appear on your buddy’s screen.
3 Click the camera icon to the left of the mode switch and choose Built-in iSight from the pop-up menu. 4 Click the “Record With iSight” button in the iMovie monitor to begin recording. The video you see in the iMovie monitor is recorded as a clip in the iMovie Clips pane. 5 Click the “Record With iSight” button again to stop recording. You can record video as long as your MacBook Pro has enough disk space to hold it. More information about iMovie HD is available in Mac Help.
Customizing Your Desktop and Setting Your Preferences You can quickly make your desktop look the way you want using System Preferences. Choose Apple () > System Preferences from the menu bar. Feel free to make changes and experiment with the following panes: Â Appearance: Select this preference pane to change the colors of buttons, menus, windows, and highlight colors, among other options.
 Desktop & Screen Saver: Select this preference pane to change the background color or pattern of your desktop, or change it to a photo or image you like. You can also choose an eye-catching screen effect that will appear on your screen when the computer is left idle.  Dock: Select this preference pane to change the size, location, and behavior of your Dock (the bar of icons at the bottom of the screen). As you get to know your computer, explore the other system preferences.
When an Application Doesn’t Respond On rare occasions, an application might “freeze” on the screen. Mac OS X provides a way to quit a frozen application without restarting your computer. Quitting a frozen application might allow you to save your work in other open applications. To force an application to quit: 1 Press Command (x)-Option-Esc or choose Apple () > Force Quit from the menu bar. The Force Quit Applications dialog appears with the application selected.
To check for updated software: 1 Choose Apple () > System Preferences. 2 Click the Software Update icon and follow the instructions on the screen. Â For more information, search for “Software Update” in Mac Help. Â For the latest information about Mac OS X, go to the Mac OS X website at www.apple.com/macosx. Connecting to a Printer Follow the instructions that came with your printer to install the required software and connect the printer. The drivers for most printers are built in to Mac OS X.
To set up a printer: 1 Choose Apple () > System Preferences and click the Print & Fax icon. 2 Click Printing and then click the Add (+) button to add a printer. 3 Select the printer you want to use, and then click Add. 4 Use the Add (+) and Remove (–) buttons to choose the printers that appear in the printer list. Monitoring Printing After you send a document to a printer, you can monitor printing, halt your print job, or put it temporarily on hold.
Connecting a Camera or Other FireWire or USB Device If you have an iPod, digital camera, video camera, scanner, or other device that has a FireWire or USB connector, you can connect it to your MacBook Pro. Follow the installation instructions that came with your device. For information about FireWire, see “Connecting with FireWire” on page 55. For information about USB, see “Using Universal Serial Bus (USB) Devices” on page 52.
 If you connect your computer to a network using Ethernet, you can exchange files with other computers on a network. You can access a server or another computer by clicking Network in the Finder sidebar, or by choosing Go > Connect to Server from the menu bar.  You can create a small Ethernet network by connecting an Ethernet cable from your MacBook Pro to another computer’s Ethernet port. After you’re connected, you can transfer files directly from one computer to the other.
3 Using Your MacBook Pro 3 Your MacBook Pro has many built-in features and connection capabilities. These include the following: Â Universal Serial Bus (USB) 2.0 ports for connecting equipment such as printers, scanners, and other devices. See “Using Universal Serial Bus (USB) Devices” on page 52. Â FireWire 400 and FireWire 800 ports for connecting high-speed equipment such as digital video cameras and external hard disk drives. See “Connecting with FireWire” on page 55. Â An ExpressCard/34 slot.
 DVI video output with the included DVI to VGA adapter for using your MacBook Pro with an external monitor or digital flat-panel display, including support for closed lid operation, video mirroring, and extended desktop (dual-display) mode. Use the Apple DVI to Video Adapter, available separately, to display content on your TV. See “Using External Video Support” on page 64.  A SuperDrive for playing and burning CDs and DVDs. See “Using Your SuperDrive” on page 69.
® To use a USB device with your computer, connect the device to the computer. Your computer automatically detects newly connected devices and loads the correct software to work with the device. Note: If your MacBook Pro can’t find the correct software when you connect a USB device, you should either install the software that came with the device or go to the website of the device manufacturer to locate and install the correct software.
Using Multiple USB Devices at the Same Time You can purchase a USB hub to connect multiple USB devices to your computer. The USB hub connects to an open USB port on your computer and provides additional USB ports (usually four or seven). High-speed hubs can support USB 2.0 high-speed devices as well as USB 1.1 compatible devices. USB 1.1 hubs don’t allow high-speed USB devices to operate at their maximum data speed. Most USB hubs have a power adapter and should be plugged into an outlet.
® USB hub Getting More Information About USB More information about USB is available in Mac Help. Choose Help > Mac Help in the menu bar and search for “USB.” You can also find information on the Apple USB website at www.apple.com/usb. For information about USB devices available for your computer, check the Macintosh Products Guide at www.apple.com/guide. Connecting with FireWire Your computer has one FireWire 400 (H) and one FireWire 800 (H) port.
You can connect a standard 6-pin FireWire device directly to the FireWire 400 (H) port. You can use a 9-to-6-pin FireWire cable to connect the 6-pin device to the FireWire 800 (H) port. You can also connect 9-pin FireWire devices directly to the FireWire 800 port, for even faster connections. Both ports provide power to connected devices, so the devices don’t need a separate power plug.
 Transfer files between your MacBook Pro and another FireWire-equipped computer using FireWire Target Disk Mode. See “Connecting Your MacBook Pro to Another Computer Using FireWire” on page 58 for more information. Using FireWire Devices To use a FireWire device with your computer, connect the device to the computer and install any software that came with the device. Your computer automatically detects newly connected devices.
Connecting Your MacBook Pro to Another Computer Using FireWire If you want to transfer files between your MacBook Pro and another FireWire-equipped Macintosh computer, or if you have a problem that prevents your computer from starting up, you can use FireWire Target Disk Mode to connect to another computer. When you start up your computer in FireWire Target Disk Mode, the other computer can access your MacBook Pro as if it were an external hard disk.
Using ExpressCards You can expand your computer’s capabilities using the ExpressCard/34 slot. You can connect a TV tuner, flash memory cards, and more. Your MacBook Pro has one ExpressCard/34 slot that accepts 34mm ExpressCards. You can insert an ExpressCard when your computer is on, off, or in sleep. ® Label side up ExpressCard/34 slot Inserting and Ejecting an ExpressCard When inserting an ExpressCard, make sure the label is facing up and the card is level.
Getting More Information About ExpressCards For information about the ExpressCards available for your MacBook Pro, check out the Macintosh Products Guide at www.apple.com/guide. How AirPort Provides Wireless Internet Access With AirPort Extreme technology, your MacBook Pro makes a wireless connection to an AirPort Express, AirPort Extreme Base Station, or any 802.11b- or 802.11g-compliant product that is connected to the phone line, a DSL or cable modem, or a local-area network (LAN) with Internet access.
Getting More Information About AirPort Extreme To purchase an AirPort Extreme Base Station or AirPort Express, go to the online Apple Store at www.apple.com/store or contact your Apple Authorized Reseller. More information about AirPort Extreme and AirPort Express is available in AirPort Help. Choose Help > Mac Help, and then choose Library > AirPort Help. You can also find information on the Apple AirPort website at www.apple.com/airportexpress and www.apple.com/airportextreme.
 Synchronize with your handheld Bluetooth enabled PDA. Using iSync, you can perform a HotSync operation without cables or send your business card or calendar events directly to a colleague’s PDA.  Exchange files between Bluetooth enabled computers and devices—even Mac to PC.  Use a Bluetooth enabled wireless printer, keyboard. mouse, or headset. Setting Up a Bluetooth Enabled Device Before you can use a Bluetooth device with your MacBook Pro, you need to set up the device to work with your computer.
Getting More Information About Bluetooth Wireless Technology You can find out more about using Bluetooth wireless technology by opening the Bluetooth File Exchange application (located in the Utilities folder within the Applications folder) and choosing Help > Bluetooth Help. You can also find information on the Apple Bluetooth website at www.apple.com/bluetooth.
Connecting to a network gives you access to other computers and potentially to network printers, modems, email, and the Internet. You can use Ethernet to share files between two computers or set up a small network. The Ethernet (G) port on your MacBook Pro automatically detects a connected Ethernet device. You don’t need an Ethernet crossover cable when connecting to other Ethernet devices. Use a 2-pair category 5 (or higher) Ethernet cable to connect to a 10 Base-T, 100 Base-T, or 1000 Base-T network.
® When an external monitor or TV is connected, you can either have the same image appear on both the built-in display and the external monitor (known as video mirroring) or use the external monitor to extend the size of the Mac OS desktop (known as dual-display mode or extended desktop mode). By default, your MacBook Pro starts up in dual-display mode. Press the F7 (i) key to switch between dual-display and videomirroring modes.
Connecting an External Display or Projector To connect an external display or projector with a DVI connection to your computer: 1 Turn on the external display or projector. 2 Make sure the display cable is connected to the external display or projector. 3 Connect the display cable to your MacBook Pro. Your MacBook Pro automatically detects the external display. 4 Adjust the resolution on the external display using the Displays pane of System Preferences or the Displays icon in the menu bar.
To operate your computer with an external monitor attached and the display closed: 1 Connect a USB keyboard and mouse to your MacBook Pro. 2 Connect the power adapter to the MacBook Pro and a power outlet. Check that the power adapter light is on. 3 Close the MacBook Pro display to put the computer to sleep. 4 Follow the steps in the previous section to connect your MacBook Pro to an external display. 5 Wait a few seconds and then press any key on the external keyboard to wake the MacBook Pro.
Connecting an Apple Flat-Panel Display You can connect your MacBook Pro to an Apple flat-panel display. Depending on the display used, the connection might require a DVI to ADC adapter, available from an Apple Store retail location, the online Apple Store at www.apple.com/store, or an Apple Authorized Reseller. Getting More Information About Using an External Monitor or TV More information about using and configuring an external monitor is available in Mac Help.
You can record sound onto your hard disk using the built-in microphone located under the left speaker grille. You can also connect external microphones or other audio equipment to the audio line in (,) port. The audio line port is also an S/PDIF stereo 3.5 mini-phono jack, which doesn’t provide power to a connected device, so you must use self-powered peripherals.
Important: The SuperDrive in your MacBook Pro supports standard circular 12 cm discs. Irregularly shaped discs or discs smaller than 12 cm are not supported. These types of discs can become lodged in the drive. Inserting a CD or DVD Disc To install or use software from a CD or DVD disc: 1 With the computer turned on, insert the disc (with the label facing up) into the drive slot until you feel the drive catch the disc and take it the rest of the way in.
Ejecting a Disc To eject a disc, do one of the following: Â Drag the disc icon to the Trash. Â Press and hold the Media Eject (C) key on the keyboard until the disc ejects. Allow the disc to fully eject before removing or reinserting it. If you can’t eject the disc, quit any applications that might be using the disc and try again. If that doesn’t work, restart the computer while holding down the trackpad button. Playing DVDs To play a DVD-Video on your MacBook Pro, insert the DVD disc.
Recording CD and DVD Discs Your MacBook Pro can record data to CD-R and CD-RW discs. You can record your own digital movies on blank recordable DVD±R or DVD±RW discs. You can also record other kinds of digital data, such as backing up files onto a recordable DVD disc. Your MacBook Pro can read but not write to DVD-RAM discs. To record data on CD-R, CD-RW, DVD±R, or DVD±RW discs: 1 Insert a blank recordable CD or DVD disc into the optical drive.
To burn an iDVD project onto a blank DVD±R or DVD±RW disc: 1 Open iDVD and open your iDVD project. 2 Click the Burn button. 3 When prompted, insert a blank recordable DVD disc into the drive. 4 Click the Burn button again. For more information, open iDVD and choose Help > iDVD Help. Important: If your battery runs down when you are burning a DVD, the burn can fail and the DVD disc will not be able to be used again. To prevent this, always use your power adapter when burning a DVD.
Understanding Sudden Motion Sensor Your MacBook Pro has Sudden Motion Sensor technology, which helps protect the hard disk from damage if the computer is dropped or shaken. Sudden Motion Sensor protection doesn’t change hard disk performance during regular MacBook Pro operation. Occasionally, unusually strong vibrations might activate the Sudden Motion Sensor technology at a time when your MacBook Pro is writing or reading data intensively (such as when playing or recording video or audio).
If your battery runs low while you are working, attach your power adapter and let the battery recharge. To replace a low battery with a charged one when you are not connected to a power adapter, it’s best to shut down your computer. If you put your MacBook Pro to sleep to replace the battery, wait until the sleep indicator light is pulsing before removing the battery.
Battery Battery LEDs Button If the battery icon in the Finder menu bar is set to show the percentage of charge, sometimes the battery won’t show a full 100 percent charge when the power adapter is attached. This is normal behavior; battery life is saved when charging is not continuously cycled on and off when the battery’s charge capacity is between 95 and 100 percent. When the battery level eventually drops below 95 percent, it will charge all the way to 100 percent.
Charging a Battery When the power adapter is connected to your computer, the battery recharges whether the computer is off, on, or in sleep. However, the battery recharges more quickly if the computer is off or in sleep. When the MacBook Pro is on, you can monitor the battery charge level using the Battery status icon in the menu bar.
For the best conservation of battery power, do the following: Â Disconnect bus-powered USB or FireWire devices when they are not in use. Â Quit open applications that you are not using. Â Turn off AirPort or Bluetooth when they are not in use. (Use the AirPort and Bluetooth status icons in the menu bar. If these icons don’t appear in the menu bar, you can turn them on in the Network and Bluetooth panes of System Preferences.) Â Remove CD and DVD discs when they are not in use.
Getting More Information About Your MacBook Pro Battery More information is available in Mac Help. Choose Help > Mac Help and search for “battery.” You can also find information about extending the life of your battery at www.apple.com/batteries/notebooks.html. Securing Your MacBook Pro You can purchase a security cable lock to protect your MacBook Pro. With a lock, you can secure your computer to a desk or table.
4 Adding Memory to Your MacBook Pro 4 This chapter provides information and instructions for installing additional memory and for removing and replacing the battery in your MacBook Pro. Warning: Apple recommends that you have an Apple-certified technician install memory. Consult the service and support information that came with your computer for information about how to contact Apple for service.
 PC2-5300 DDR2 667 MHz Type RAM Depending on the configuration of the MacBook Pro you purchased, both memory slots might already be full. The maximum amount of memory you can install in your MacBook Pro is 2 GB, using one 1 GB DIMM in each memory slot. Installing Additional Memory Installing memory involves removing and replacing your battery. The following procedure includes instructions for adding memory and replacing your battery. Step 1: Removing the Battery 1 Shut down your MacBook Pro.
2 Turn over the MacBook Pro and locate the release latches on either side of the battery. Slide both latches up. The battery should pop up slightly. Lift it out. Warning: The internal components of your MacBook Pro can be hot. If you have been using your MacBook Pro, wait 10 minutes after shutting down to let the internal components cool before continuing.
Step 2: Installing Memory 1 Using a Phillips size 00 screwdriver, unscrew the memory door and remove it from the battery bay of your computer.
2 Touch a metal surface inside the computer to discharge any static electricity from your body.
3 If you need to remove a memory card that’s already in the slot, spread the tabs in the slot away from the notches in the memory card. The card should pop up slightly. Lift the memory card to a 30-degree angle and then gently slide the card out of the memory slot. 4 Insert the memory card at a 25-degree angle. Line up the notch in the card with the small tab in the memory slot and slide the card into the slot until the gold edge is almost invisible. Then firmly push the memory card into the memory slot.
5 Gently spread the small tabs in the memory slot away from the notches and push the memory card down until the two snaps on either side of the card lock into place. 25O Correctly Incorrectly inserted inserted Note: Make sure your memory is installed according to this illustration, where the gold contacts are almost completely inserted into the connector.
6 Insert any additional memory in the second slot. 7 Replace the memory door and make sure it is lying flat before screwing it into place.
Step 3: Replacing the Battery 1 Place the bottom edge of the battery in the battery compartment. Gently press the top edge of the battery down until the battery latch locks into place. 2 Reconnect the power adapter and any other cables that were attached. Making Sure Your MacBook Pro Recognizes the New Memory After installing additional memory in your MacBook Pro, check whether the computer recognizes the new memory.
To check the computer’s memory: 1 Start up your MacBook Pro. 2 When you see the Mac OS desktop, choose Apple () > About This Mac. Total memory installed in your MacBook Pro For a detailed breakdown of the amount of memory installed in your computer, open System Profiler by clicking More Info and then Memory.
5 Troubleshooting 5 If you have a problem working with your MacBook Pro, check here first for solutions and advice. When you have a problem working with your MacBook Pro, there is usually a simple and quick solution. Think about the conditions that led up to the problem. Making a note of things you did before the problem occurred will help you narrow down possible causes and then find the answers you need. Make a note of the following: Â The applications you were using when the problem occurred.
Problems That Prevent You from Using Your Computer If the computer doesn’t respond or the pointer doesn’t move  Press Command (x)-Option-Esc to force a frozen application to quit. In the dialog that appears, select the application you want to quit and click Force Quit. Next, save your work in any open applications and restart the computer to make sure the problem is entirely cleared up.
 If that doesn’t work, try using Disk Utility to repair the disk. Insert the Mac OS X Install Disc 1 into your computer. Then restart your computer and hold down the C key as it starts up. Choose Installer > Open Disk Utility. When Disk Utility opens, follow the instructions in the First Aid pane to see if the utility can repair your disk. If using Disk Utility doesn’t help, you might need to reinstall your computer’s system software.
5 Press the power (®) button and immediately hold down the Command (x), Option, P, and R keys simultaneously until you hear the startup sound a second time. 6 If you are still unable to start up your MacBook Pro, see the service and support information that came with your MacBook Pro for information about contacting Apple for service. If the display suddenly goes black or your system freezes Try restarting your computer. 1 Unplug any devices that are connected to your MacBook Pro except the power adapter.
2 Choose Installer > Reset Password from the menu bar. Follow the instructions on the screen. If you have a problem with an application  For problems with software from a manufacturer other than Apple, contact the manufacturer. Software manufacturers often provide software updates on their websites.  You can configure your MacBook Pro to automatically check for and install the latest Apple software using the Software Update pane of System Preferences.
 See AirPort Help (choose Help > Mac Help, then choose Library > AirPort Help from the menu bar). Also see the instructions that came with the wireless device for more information. If your computer’s hard disk is not recording data correctly  In a few instances, if the hard disk undergoes unusually strong vibration, the Sudden Motion Sensor might become active and result in dropped frames or unrecorded portions of sound or data when the disk is recording intensively.
 Open the Network pane of System Preferences and verify the information entered there with your Internet service provider (ISP) or network administrator. If you have a problem using your computer or working with the Mac OS  If the answers to your questions are not in this manual, choose Help > Mac Help from the menu bar and search for instructions and troubleshooting information.  Check the Apple Support website at www.apple.
6 After selecting the destination disk for installation, continue following the onscreen instructions. Your computer might restart and ask you to insert the next Mac OS X installation disc. Note: To restore Mac OS X on your computer to the original factory settings, click Options in the Select a Destination pane of the Installer, and then select Erase and Install. After selecting the destination disk for installation, continue following the onscreen instructions for a basic installation of Mac OS X.
Note: To install iCal, iChat AV, iSync, iTunes, Safari, and the iLife applications, follow the instructions in “Installing Mac OS X and Applications” on page 97. You might need to insert Mac OS X Install Disc 2, depending on the applications you choose to install. Using Apple Hardware Test You can use Apple Hardware Test to help determine if there is a problem with your computer’s hardware. To use Apple Hardware Test: 1 Disconnect all external devices from your computer except the power adapter.
Installing Xcode Tools To install just the Xcode Tools, which are intended for software developers to use, follow these steps: 1 Insert the Mac OS X Install Disc 1 that came with your computer. 2 Double-click Xcode Tools. 3 Double-click XcodeTools.mpkg. 4 Follow the onscreen instructions. Locating Your Product Serial Number Use one of these methods to find your computer’s serial number: Â Choose Apple () > About This Mac and then click on the version number beneath the words “Mac OS X.
Specifications A Appendix A You can use System Profiler to find out detailed information about your MacBook Pro. You can find out the amount of built-in memory, hard disk size, devices connected, the product serial number, and more. To access the information in System Profiler, choose Apple () > About This Mac from the menu bar and then click More Info, or open System Profiler, located in /Applications/Utilities/.
Operating Environment  Operating temperature: 50° F to 95° F (10° C to 35° C)  Altitude: 3048 m (10,000 ft.) maximum  Relative humidity: 0% to 90% noncondensing Power Adapter  Input: AC 100–240 volts (V), 50/60 hertz (Hz)  Output: DC 18.5 V @ 4.6 A; 16.5 V @ 3.6 A Battery  Output: DC 10.8 V More information is available on the Apple website at www.apple.com/macbookpro and www.apple.com/support.
Safety, Use, and Care Information B Appendix B Read this important MacBook Pro safety and maintenance information. Apple products are designed and evaluated to the latest standards for safety of information technology equipment. However, to ensure safe usage, it is important that safety instructions marked on the product and in the documentation are followed.
 You want to remove any parts.  The power cord or plug becomes frayed or otherwise damaged.  You spill something into the case.  Your computer is exposed to rain or any other excess moisture.  Your computer has been dropped or the case has been otherwise damaged.  You suspect that your computer needs service or repair.  You want to clean the case (use only the recommended procedure described later).  The MacBook Pro power adapter port contains a magnet.
Setting Up Your MacBook Pro and Power Adapter Ensure the AC plug or AC power cord is fully inserted into the power adapter before plugging the adapter into a power outlet. For best results, connect the adapter using the AC power cord and use a grounded power outlet. Use only the power adapter that came with your MacBook Pro.
Using Your MacBook Pro When you’re using your MacBook Pro or charging the battery, it is normal for the bottom of the case to get warm. For prolonged use, place your MacBook Pro on a flat, stable surface. Do not leave the bottom of your MacBook Pro in contact with your lap or any surface of your body for extended periods. Prolonged contact with your body could cause discomfort and potentially a burn.
Storing Your MacBook Pro If you are going to store your MacBook Pro for an extended period of time, keep it in a cool location (ideally, 71° F or 22° C) and do one of the following to preserve your MacBook Pro battery life: Â Discharge the battery 50 percent before storing your MacBook Pro. Â When storing your computer for longer than five months, discharge the battery to approximately 50 percent and then remove it from the MacBook Pro.
Avoiding Hearing Damage Warning: Permanent hearing loss may occur if earbuds or headphones are used at high volume. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected.
Because of the optical disc drive in your computer, your computer is a Class 1 laser product. The Class 1 label, located in a user-accessible area, indicates that the drive meets minimum safety requirements. A service warning label is located in a service-accessible area. The labels on your product may differ slightly from the ones shown here.
Understanding Ergonomics Here are some tips for setting up a healthy work environment. Keyboard and Trackpad When you use the keyboard and trackpad, your shoulders should be relaxed. Your upper arm and forearm should form an angle that is slightly greater than a right angle, with your wrist and hand in roughly a straight line. This Not this Use a light touch when typing or using the trackpad and keep your hands and fingers relaxed. Avoid rolling your thumbs under your palms.
This Not this Change hand positions often to avoid fatigue. Some computer users might develop discomfort in their hands, wrists, or arms after intensive work without breaks. If you begin to develop chronic pain or discomfort in your hands, wrists, or arms, consult a qualified health specialist. Chair An adjustable chair that provides firm, comfortable support is best. Adjust the height of the chair so your thighs are horizontal and your feet are flat on the floor.
External Mouse If you use an external mouse, position the mouse at the same height as your keyboard and within a comfortable reach. Built-in Display Adjust the angle of the display to minimize glare and reflections from overhead lights and windows. Do not force the display if you meet resistance. The display is not meant to open past 135 degrees. You can adjust the brightness of the screen when you take the computer from one work location to another, or if the lighting in your work area changes.
Connecting to the Internet C Appendix C You can use your computer to browse the World Wide Web, send email to friends and family, and chat in real time over the Internet. Use this information to help you connect to the Internet. When you first start up Mac OS X, Setup Assistant helps you enter your Internet configuration information.
 Dial-up connection: Your computer is connected to an external modem that is plugged into a phone wall jack using a phone cable. Before you connect to the Internet: 1 Set up an account with an Internet service provider (ISP). 2 Gather the connection information you need from your ISP or network administrator. See the next section, “Gathering the Information You Need,” to find out what information to get for each type of connection.
4 Turn on your computer and enter information in Setup Assistant to configure your Internet connection. Note: If you already started up your computer and didn’t use Setup Assistant to configure your Internet connection, see “Using Network Setup Assistant to Connect” on page 117. Gathering the Information You Need You can write the information you get from your ISP, your network administrator, or your other computer on these pages, and then enter it in Network Setup Assistant.
To set up a DSL, cable modem, LAN, or AirPort Extreme wireless connection, choose your connection method (ask your system administrator or your ISP, if you don’t know):  Manually  Using DHCP (Dynamic Host Configuration Protocol) with manual address  Using DHCP  Using BootP  PPP (Point-to-Point Protocol) If you’re unsure which method to use, “Using DHCP” might be a good choice, because the network supplies most of the required information for you automatically.
If you select PPPoE (for Point-to-Point Protocol over Ethernet connections), gather the following:  Service provider  Account name  Password  PPPoE service name The information below is optional. Ask your ISP or system administrator whether you need it.  DNS servers  Domain name  Proxy server Entering Your Information After gathering your specific setup information from your ISP or network administrator, you can use Network Setup Assistant to connect or enter the information manually.
3 Click Assistant to open Network Assistant. 4 Follow the onscreen instructions. More information about setting up an Internet connection is available in Mac Help. Choose Help > Mac Help and search for “connecting to the Internet.” Manually Entering Information To enter your information manually: 1 Open System Preferences > Network.
Troubleshooting Your Connection If you have trouble with your Internet connection, you can try the steps in this section for your type of connection or you can use Network Diagnostics. To use Network Diagnostics: 1 Choose Apple () > System Preferences. 2 Click Network and then click “Assist me.” 3 Click Diagnostics to open Network Diagnostics. 4 Follow the onscreen instructions.
Turn the modem off and on and reset the modem hardware Cycle the power on your DSL or cable modem by turning it off for a few minutes and then turning it back on. Some ISPs recommend that you unplug the modem’s power cord. If your modem has a reset button, you can press it either before or after turning the modem off and on again.
Network Connections If you have two or more computers attempting to share an Internet connection, be sure that your network is set up properly. You need to know if your ISP provides only one IP address or if it provides multiple IP addresses, one for each computer. If only one IP address is used, then you must have a router capable of sharing the connection, also known as network address translation (NAT) or “IP masquerading.
Top Ten Questions D Appendix D Do you have a question? Here are the top ten questions commonly asked by new MacBook Pro users. My Internet connection doesn’t seem to be working. How do I set it up? There are different types of Internet connections. For example, you can connect using a modem, a DSL connection, a wireless AirPort connection, or an Ethernet network. You will need to supply Mac OS X with specific information about your connection type, Internet service provider, or network.
How do I set up my printer? Is it compatible with my MacBook Pro? Begin by connecting your printer and installing any software according to the instructions that came with your printer. Next, open System Preferences and click the Print & Fax icon. Use the Print & Fax pane to configure your MacBook Pro to access the printer. You’ll find lots of information about setting up printers in Mac Help (choose Help > Mac Help from the menu bar and search for “printer”).
How does the Mac OS X interface work? Users new to Mac OS X often have questions about how to carry out certain tasks. Your best source for Mac OS X information is Mac Help. You’ll find introductory explanations for new users, users switching from Windows computers, and users upgrading from Mac OS 9. Open Mac Help by choosing Help > Mac Help in the menu bar at the top of your screen. Browse the new Mac OS X user information listed there.
I put a disc in my optical drive, but nothing happened. How do I know if the disc is compatible with my optical drive? Press the Media Eject (C) key to eject the disc. Apple slot-loading optical drives support only round 12 cm discs. Nonstandard discs and discs with noncircular shapes do not work in the optical drive. For more information about nonstandard discs, go to the Apple Service & Support website at www.apple.com/support and search for “nonstandard discs.
To connect an external display or projector with a VGA connection to your computer: 1 Turn on the external display or projector. 2 Make sure the display cable is connected to the external projector or display. 3 Connect the DVI to VGA adapter that came with your MacBook Pro to the VGA connector of the external display or projector, and then connect the adapter to your MacBook Pro. Your MacBook Pro automatically detects the external display.
An application or Mac OS X doesn’t seem to be working correctly. Do I need to reinstall Mac OS X? The process of troubleshooting a problem requires that you answer several questions, such as whether the problem always happens with a specific application, is related to your operating system, or is a result of faulty hardware. Before you reinstall, see “Troubleshooting” on page 91 to help analyze the problem.
Communications Regulation Information Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected.
Responsible party (contact for FCC matters only): Apple Computer, Inc. Product Compliance, 1 Infinite Loop, M/S 26-A, Cupertino, CA 95014-2084, 408-974-2000. Wireless Radio Use This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range to reduce the potential for harmful interference to cochannel Mobile Satellite systems. Complies with the Canadian ICES-003 Class B specifications. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Korea Statements VCCI Class B Statement Singapore Wireless Certification External USB Modem Information Taiwan Wireless Statements When connecting your MacBook Pro to the phone line using an external USB modem, refer to the telecommunications agency information in the documentation that came with your modem. ENERGY STAR® Compliance As an ENERGY STAR® partner, Apple has determined that standard configurations of this product meet the ENERGY STAR® guidelines for energy efficiency.
Disposal and Recycling Information The backlight lamp in this product contains mercury. Dispose according to local, state, and federal laws. For information about Apple’s recycling program, go to www.apple.com/environment/summary.html. Taiwan: European Union—Disposal Information: Battery Disposal Information Dispose of batteries according to your local environmental laws and guidelines. Deutschland: Das Gerät enthält Batterien. Diese gehören nicht in den Hausmüll.
Index Index A AC plug 8, 9, 31 AC power adapter. See power adapter AC power cord 9, 31 adapters DVI to VGA 64 power 30 See also power adapter adjusting your display 28 AirPort Express 60 AirPort Extreme about 60 problems 95 setting up a connection 116, 118 ALS system 28, 34 amber light 30 ambient light sensing (ALS) system 28, 34 Appearance preferences 44 Apple Hardware Test 99 Apple MagSafe Power Adapter.
checking memory 89 cleaning your computer 107 your display 107 closed display 66 computer freezes 92 inventory 7 won’t turn on 93 connecting Bluetooth devices 61 cable modem 10 DSL modem 10 to an Ethernet network 10 external devices 52 external display 65 FireWire devices 55 flat-panel display 68 headphones 48 to Internet 15 a monitor or TV 126 a printer 47 TV 67 two computers 57, 58 USB printers 52 VCR 67 video cameras 55 video device 67 wirelessly 60 conserving battery power 125 controls 134 Index brig
cable 57, 58 devices and battery power 57 port 21, 55 Target Disk Mode 57, 58 Force Quit 46 Front Row, using with Apple Remote 35 frozen application 46 function key 19 G general safety 103 green light 30 H hand positions 110 hard disk 96 headphones connecting 48 port 21, 68 heat 106, 127 hub, USB 54 I iChat help 42 using built-in iSight 40 videoconferencing 41 image size 29 iMovie HD 42 infrared receiver (IR) Index location 17 turning off reception 39 using 35 inserting a disc 70 installation instructi
Network preferences 78 Network Setup Assistant 113 networking two computers 57, 58 wirelessly 60 Num Lock key 19 number, serial 100 numeric keypad 33 O operating environment specifications 102 operating system 43 optical digital audio out port 21 optical drive about 17, 70 compatible discs 126 disc sizes supported 70 P password, resetting 127 Photo Booth 40 playing CDs 69 DVD-Video discs 71 plug, AC 8, 9 Point-to-Point Protocol (PPP) 118 ports audio line in 21 DVI 21 136 Index Ethernet 21 external disp
to connect manually 117 Setup Assistant 13, 14 shutting down 23 sleep indicator light 17 putting computer to sleep 22 software applications 45 installation discs 97 reinstalling 97, 128 updating 46 Software Update preferences 47 speakers 17, 68 specifications battery 102 operating environment 102 power adapter 102 Spotlight 43 Startup Disk preferences 56, 92 stopping an application 46 the computer 23 storing your computer 107 Sudden Motion Sensor 74 SuperDrive.