Owner manual
Table Of Contents
- Congratulations, you and your MacBook were made for each other.
- Contents
- 1 Ready, Set Up, Go
- 2 Life with Your MacBook
- 3 Boost Your Memory
- 4 Problem, Meet Solution
- Problems That Prevent You from Using Your MacBook
- Using Apple Hardware Test
- Problems with Your Internet Connection
- Problems with AirPort Extreme Wireless Communication
- Keeping Your Software Up to Date
- Reinstalling the Software That Came with Your MacBook
- Learning More, Service, and Support
- Locating Your Product Serial Number
- 5 Last, but Not Least
- Regulatory Compliance Information
- Looking for Something?
Chapter 3 Boost Your Memory 35
Installing Additional Memory
Installing memory involves removing and replacing the battery. The following
procedure includes instructions for removing the battery, adding memory, and
replacing the battery.
Step 1: Remove the battery.
1 Shut down your MacBook. Disconnect the power adapter, Ethernet cable, and any
other cords connected to the MacBook to prevent damaging the computer.
WARNING: Use care when handling the battery. See the battery safety information
on page 60.