3.5

229MainStage Effects
Ringshifter Output parameters
• Dry/Wet knob and field: Set the mix ratio of the dry input signal and the wet effect
signal.
• Feedback knob and field: Set the amount of signal routed back to the effect input.
Feedback adds an edge to the Ringshifter sound and is used for a variety of special
effects.
• Feedback, in combination with a slow oscillator sweep, produces a rich phasing
sound.
• A high Feedback setting with a short delay time of less than 10 ms produces comb-
filtering effects.
• A high Feedback setting with a longer delay time produces continuously rising and
falling frequency shift effects.
• Stereo Width knob and field: Determine the breadth of the effect signal in the stereo
field. Stereo Width affects only the effect signal of the Ringshifter, not the dry input
signal.
• Env Follow slider and field: Determine the amount of Dry/Wet parameter modulation by
the input signal level.
• LFO slider and field: Set the LFO modulation depth of the Dry/Wet parameter.