3.5

54MainStage Effects
Use DelayDesigner tap toggle buttons
Each tap has its own toggle button in the Toggle bar. These buttons provide a quick way to
graphically turn parameters on and off. The parameter being toggled is determined by the
current view button selection.
1. In MainStage, click the view button for the parameter you want to toggle.
2. Click the toggle button of each tap that you want to change:
• Cutoff view: Turn the filter on or off.
• Reso view: Switch the filter slope between 6dB and 12dB.
• Pitch view: Switch pitch transposition on or off.
• Pan view: Switch between the Flip modes.
• Level view: Mute or unmute the tap.
Note: The first time you edit a filter or pitch transpose parameter, the filter or pitch
transposition module automatically turns on. After you manually turn off either of these
modules, however, you need to manually switch it back on.
Temporarily switch the mute state of taps
• In any view in MainStage, Option-Command-click a toggle button.
When you release the Option and Command keys, the toggle buttons return to their
standard functionality in the active view.
Zoom the Tap display
In MainStage, do one of the following:
• Vertically drag the highlighted section (the bright rectangle) in the Overview display.
• Horizontally drag the highlighted bars—to the left or right of the bright rectangle—in the
Overview display.