3.5

60MainStage Effects
Align the values of several taps
1. In MainStage, Command-click in the Tap display, and drag while holding down the
Command key.
A line trails behind the pointer as you drag.
2. Click the appropriate position to mark the end point of the line.
The values of taps that fall between the start and end points are aligned along the line.
Reset the value of a tap
In MainStage, you can use the Tap display or Tap parameter bar to reset tap parameters to
their default values.
• To reset a parameter to its default setting in the Tap display: Option-click a tap to reset
the selected parameter to its default setting.
If multiple taps are selected, Option-clicking any tap resets the chosen parameter to its
default value for all selected taps.
• To reset a parameter to its default setting in the Tap parameter bar: Option-click a
parameter value to reset it to the default setting.
If multiple taps are selected, Option-clicking a parameter of any tap resets all selected
taps to the default value for that parameter.