3.5

98MainStage Effects
See the Multipressor Display, Frequency Band, and Output parameter sections, and use
tips.
MainStage Multipressor display parameters
Multipressor parameters are grouped into three main areas:the graphic display in the
upper section, the set of controls for each frequency band in the lower section, and the
output parameters at the right.
Display parameters
• Graphic display: View and adjust the frequency and gain for each frequency band. The
amount of gain change from 0dB is indicated by blue bars. The band number appears in
the center of active bands. You can adjust each frequency band in the following ways:
• Drag the horizontal bar up or down to adjust the gain makeup for that band.
• Drag the vertical edges of a band to the left or right to set the crossover
frequencies, which adjusts the overall band frequency range.
• Crossover fields: Drag to set the crossover frequency between adjacent bands.
• Gain Make-up fields: Drag to set the amount of the gain make-up for each band.