3

Chapter 6 Filter eects 130
EVOC 20 TrackOscillator output parameters
The output section provides control over the type, stereo width, and level of signal that is sent
from the EVOC 20 TrackOscillator.
Output parameters
•
Signal pop-up menu: Choose the signal that is sent to the plug-in’s main outputs:
•
Voc(oder): Hear the vocoder eect.
•
Syn(thesis): Hear only the synthesizer signal.
•
Ana(lysis): Hear only the analysis signal.
Note: The last two settings are mainly useful for monitoring purposes.
•
Level slider: Drag to set the overall volume of the output signal.
•
Stereo Mode pop-up menu: Choose the input/output mode.
•
In s/s mode (stereo input/stereo output), the left and right channels are processed by
separate lter banks.
•
In m/s mode (mono input/stereo output), a stereo input signal is rst summed to mono
before being routed to the lter banks.
•
Stereo Width knob: Rotate to distribute the output signals of the synthesis section’s lter bands
in the stereo eld.
•
At the 0 position to the left, the outputs of all bands are centered.
•
At the centered position, the outputs of all bands ascend from left to right.
•
At the Full position to the right, the bands are output—alternately—to the left and
right channels.