User manual

70 Chapter 7 Working in Layout Mode
Adding Screen Controls
In Layout mode you can quickly add screen controls to your layout and arrange them
in the workspace.
To add a screen control:
m Drag the screen control from one of the control palettes to the workspace.
As you drag the screen control to the workspace, a white outline appears, showing
where it will be added. You can use the grid to align the screen control with other
items in the workspace.
You can drag screen controls into the workspace in any order. If you plan to perform
with a keyboard controller, you might want to first drag a keyboard screen control into
the workspace, position it near the center, and then drag screen controls for the faders,
knobs, wheels, buttons, and other physical controls on the keyboard controller.
When you drag a screen control into the workspace, the control is selected, and the
available hardware assignments and other parameters for the screen control appear in
the Layout Inspector to the left of the workspace. Different types of screen controls
have different parameters, which are described in “Editing Screen Control Parameters”
on page 78.
Adding Mod/Pitch Wheel Screen Controls
When you add mod/pitch wheels to a layout, by default they are configured to receive
the following MIDI message types:
 The first mod/pitch wheel is configured to receive modulation messages.
 The second mod/pitch wheel is configured to receive pitch bend messages.
 The third mod/pitch wheel is configured to receive aftertouch messages.
By default, modulation and pitch bend screen controls pass through the MIDI messages
for their common use—that is, mod wheels pass through MIDI modulation messages,
and pitch bend wheels pass through MIDI pitch bend messages. In most cases this is
desirable, so that you can use for their standard functions without any additional setup.
If you want to use these screen controls to control other parameters, choose “Don’t
pass thru” from the MIDI thru pop-up menu in the Layout Inspector.
Adding Foot Pedal Screen Controls
When you add a foot pedal to a layout, by default the first foot pedal you add is
configured to receive expression messages, and the second foot pedal you add is
configured to receive volume messages.
By default, expression pedal screen controls pass through the MIDI messages for their
common functions (expression or volume). If you want to use an expression pedal
screen control to control another parameter, choose “Don’t pass thru” from the MIDI
thru pop-up menu in the Layout Inspector.