User manual

74 Chapter 7 Working in Layout Mode
2 Drag the lower alignment guide (the one aligned with the front of the shelf control).
Drag the lower alignment guide down to make the angle steeper (as though you are
looking down on the shelf control from above), or drag it up to make the angle less
steep (as though you are looking at it from the front).
Moving the Shelf Vertically
You can also move the shelf vertically to change its position in the workspace. When
you move the shelf vertically, all screen controls on the shelf (for example, a
modulation or pitch bend wheel and a keyboard) move with the shelf.
To move a shelf vertically:
1 Select one of the screen controls on the shelf.
The alignment guides for the shelf appear.
2 Place the pointer over the upper alignment guide (the one aligned with the rear of the
shelf control).
The pointer becomes a move pointer (a horizontal bar with up and down arrows).
3 Drag the upper alignment guide to move the shelf to a new position.
Drag the front (lower)
alignment guide to
change the angle
of the shelf.
Drag the rear (upper)
guide to move the shelf
vertically.