3

Chapter 14 Ultrabeat 357
Edit the graphical EQ curve
Do any of the following:
m To change the EQ frequency, drag horizontally.
m To change the Gain, drag vertically.
m To change the Q factor, drag the handle shown at the peak (maximum point) of the EQ curve.
Ultrabeat pan and stereo spread
Ultrabeat pan modulation mode
The EQ’s output signal is passed along to the Pan Modulation/Stereo Spread section where the
placement of the sound in the stereo eld can be modulated (pan modulation mode), or the
stereo basis of the sound can be broadened (stereo spread mode).
Pan Modulation varies the panorama position of a drum sound with a mod (and via) source.
Note: The modulation set here is relative to the panorama position set in Ultrabeat’s mixer in the
Assignment section.
The panorama position
(set in the mixer) is
represented by a thin,
red line.
Pan Mod button
Spread button
Pan modulation parameters
•
Pan Mod button: Click to turn on pan modulation mode. If neither mode is activated, the signal
passes through unaected.
•
Mod and via pop-up menus: Choose the modulation and via sources for pan modulation.
•
Mod and via sliders: The blue and the green controls set the amount (intensity) of mod and
via modulation.
Note: You cannot directly move the red line that represents pan position shown in this section.
To move the line, rotate the Pan knob in the Mixer section.