3.5

60MainStage User Guide
Mono channel strips have a Pan knob by default. Stereo channel strips have a Balance knob
by default.
Select a channel strip’s pan mode
• In MainStage, control-click on the Pan knob, then choose a panner from the
shortcut menu.
Set a channel strip’s pan or balance position
In MainStage, do one of the following:
• Drag the channel strip’s Pan or Balance knob horizontally or vertically.
• Option-click the Pan knob to return it to the center position.
• Hold down Shift while you drag the knob to change the pan position in finer increments.
Adjust a channel strip’s Stereo Pan settings
In MainStage:
• To adjust the stereo spread of one channel of the stereo field without affecting the
other channel, drag that channel’s white handle. For example, if you want to narrow the
stereo field of the left channel without affecting the right channel, drag the white handle
of the left channel vertically closer to the center position.
• To invert the right and left channels, Command-click anywhere inside the Stereo Pan
knob or ring. The signal ring changes color from green to orange (or back again).
• To widen or narrow the stereo spread range, drag the green or orange ring vertically.