Specifications

Document SubTitle
112 Proprietary and Confidential 2130114
84
certification tests, 70
equipment, suggested, 87
ESD immunity, techniques document (IEC-61000-4-2), 14
GPS receiver, MC8775V, 83
manual functional test, suggested, 71
production tests, 71
quality assurance tests, 86
RF receive path, MC57xx, 79
RF receive path, MC87xx, 81
RF transmission path, MC57xx, 76
RF transmission path, MC87xx, 77
sensitivity, OTA test chamber configuration, 43
suggestions, 69– 89
testing, path loss calculation, 45
thermal
considerations, 65– 66
design checklist, 68
dissipation, factors affecting, 65
dissipation, suggestions, 65
RF shield temperature, maximum, 66
testing, module, 65– 66
timing
power ramp-up, 25
power-up, 25
transducer interface
host-controlled
, 54
transducer interfaces
codec, 48
transmit power wave form, 26
Tx band
RF parameters, MC57xx, 37
Tx power
RF parameters, MC57xx, 37
U
UDK (Universal Development Kit)
components, included, 12
Universal Development Kit (UDK)
components, included, 12
Universal Serial Bus. See USB.
usage models
current consumption, 36
USB
enumeration, power-up, 25
handshaking, 57
host driver requirements, 58
interface
host•module communication, 56– 58
overview, 56
resume mode, 57
specification, 15
suspend mode, 57
USIM
capacitor recommendations, 61
card contacts, 60
clock rate, 61
connector type, required, 12
electrical specifications, 61
impedance, connectors, 61
interface diagram, 60
interface, overview, 59
operation, 61– 62
pin assignments, 59
socket placement, 62
V
voice memo
host-controlled, 54
Voltage Standing Wave Ratio (VSWR)
test criteria, 95
volume, setting
responsible codec, 54
VSWR (Voltage Standing Wave Ratio)
test criteria, 95
W
W_Disable#
deasserted, causes inrush current event, 25
de-asserted, peak current, 25
inrush currents, 24
MC5728V information, 104
module, powering off, 21, 23
Normal state, 19
off state, 19
Z
ZIF (Zero Intermediate Frequency), 41