Specifications

Introduction
Rev 2.0 Apr.10 Proprietary and Confidential 13
6. Thermal Considerations on page 65
Describes thermal characteristics of the module and provides suggestions for
testing and addressing thermal issues.
7. Design Checklist on page 67
Summarizes design considerations for integration of AirPrime embedded
modules in your host devices.
8. Tes tin g on page 69
Describes suggested acceptance, certification, production, and quality
assurance tests.
9. Antenna Specification on page 91
Describes antenna requirements and testing details.
10. Regulatory Information on page 99
Describes regulatory approvals and regulatory information requirements.
11. MC5728V Important Signal Considerations - Application Note on page 103
Describes important signal considerations regarding MDL_RESET_N and
W_DISABLE# signals of the MC5728V module.
12. Acronyms and Definitions on page 105
Lists acronyms and definitions used throughout this guide.
13. Index on page 107
Note: The term "host" always refers to the host device.
Related documents
This guide deals specifically with hardware integration issues that are unique to
AirPrime embedded modules.
Tabl e 1- 2 lists other documents referenced in this guide.
Table 1-2: Related documentation
Document title Description
AT Command Set for User Equipment (UE)
(Release 6) (3GPP TS 27.007)
Standard AT commands for GSM/UMTS devices.
CDMA 1X Standard
(CDMA 200 Series Release A (2000) -
Document #TIA/EIA/IS-2000 Series,
Release A)
Technical requirements for CDMA systems, including details on sleep
cycle index (SCI) values.
CDMA CnS Reference (Document 2130754) CnS (Control and Status) messages supported by AirPrime CDMA
embedded modules.
CDMA AT Command Reference (Document
2130620)
Proprietary, basic AT commands for AirPrime CDMA embedded
modules.
For UMTS-specific commands, see AirCard/AirPrime UMTS devices
Supported AT Command Reference (Document 2130617).